It occurs in some cases that your car makes noises in the brake calipers, you are certainly not reassured by this sort of noise and you automatically tend to think that you will have an incident or that the fix will cost you an astronomical amount of money. So, what if you identify noise from the brake calipers on your Citroen Jumpy 2? It most likely is not some thing major and you may be able to repair it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have made the decision to create this article and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Citroen Jumpy 2, and give you the causes for them in order to help you solve the issue.brake-caliper-noisecitroen-jumpy-2

The different types of brake caliper noise on Citroen Jumpy 2 and their causes

The function of the Citroen Jumpy 2 brake calipers is to come pinch the brake discs of your Citroen Jumpy 2 thanks to the pads they will activate. This component is an fundamental element of your vehicle’s safety. Discovering a sound from it must therefore be looked into quickly and leaving it lying around is not a good solution.

I hear a grinding noise on my brake calipers on Citroen Jumpy 2

If you find out a grinding or scrap metal noise coming from the brake calipers of your Citroen Jumpy 2, it is highly imaginable that it will be related to brake pads at the end of their life, indeed, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but based on your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be swapped quickly as they will promptly ruin your discs and keep doing this scrap or grinding noise on Citroen Jumpy 2. If after looking at this point, you’re still going through a grinding noise on your Citroen Jumpy 2, have a look at this article to find a solution.

I feel a continuing noise that stops when I brake from my Citroen Jumpy 2 brake calipers

If you are the victim of a regular noise in the brake calipers of your Citroen Jumpy 2 that only stops when you press your brake system, it is quite conceivable that caliper wear is the cause. In fact, they can jam over time, especially if they are not employed enough. In such a case, they will tend to remain in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.

When I brake, my brake pedal vibrates on my Citroen Jumpy 2

If in your case, you feel a vibration when braking that would have come from the brake calipers of your Citroen Jumpy 2, you will have to get worried about the condition of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be changed at some point. A vibration most often notifies of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your technician.

When I brake, I feel a squealing in my brake calipers of my Citroen Jumpy 2

Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Citroen Jumpy 2, creating a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).