When you discover unusual noises on your Renault Laguna 3 you usually tend to get worried. Especially when you experience a noise coming from the release bearing of your Renault Laguna 3. It is directly assimilated to an engine problem and can therefore be serious. As we know that you do not take these concerns lightly, we have chosen to create this content page to support you find the triggers and free yourself from this matter as quickly as possible. To do this, we will first focus on the function and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Renault Laguna 3 and their sources.
What is the function and operation of the release bearing on Renault Laguna 3?
Task of the release bearing on Renault Laguna 3
The release bearing of your Renault Laguna 3 has a crucial function in the operation of your entire gearbox system. Indeed, its mission is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Renault Laguna 3.
Objective of release bearing Renault Laguna 3
Let’s now look at the technical side, the release bearing is composed of two parts, a first fixed part that slides only when the stop is pulled, or pushed (determined by its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two different types of release bearing Renault Laguna 3 :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two types of release bearing . This one, contrary to the hydraulic type, is operated by a mechanical pulling system that will release the clutch disc. In this case, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more technical, is the kind most used in modern automobiles. It is however more complex than the pulled release bearing. Indeed, it will be composed of a hydraulic tube that will receive the pressure right from the clutch pedal.
More conventional clutch stop
Release bearing noises Renault Laguna 3 and their sources
I experience a release bearing noise on Renault Laguna 3 once I drive and it stops when I release my clutch pedal
If you experience a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ends when you press your clutch pedal, this noise often sounds like a bell noise, it is highly possible that your release bearing is the cause. Make sure that this noise stops when you disengage, in which circumstance it is time to replace the release bearing of your Renault Laguna 3.
I experience a release bearing noise when my pedal is up and I experience jolts in my foot
If you experience too much or too little resistance when you press your clutch pedal, and it is connected with jolts that you can experience in your clutch pedal, then the stop/fork release/blades grouping is degraded. Indeed, this noise often comes from the broken fork that no longer allows the device to run normally.
I experience a grinding noise coming from the release bearing of my Renault Laguna 3 when I try to shift gears and they do not shift
This matter appears most often on models equipped with hydraulic release bearing. It is often associated with a clutch pedal that has little or no resistance. If you are in this circumstance and you feel a grinding or cracking noise coming from the release bearing of your Renault Laguna 3, then you probably have a leak coming from your release bearing. It must therefore be swapped fairly quickly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Renault Laguna 3 and it’s not from your release bearing, check this article to have more informations.
