When you locate unusual noises on your Hyundai Veloster you commonly tend to get worried. Especially when you experience a noise coming from the release bearing of your Hyundai Veloster. It is immediately assimilated to an engine problem and can therefore be serious. As we know that you do not take these trouble lightly, we have chosen to make this article content to help you find the causes and free yourself from this matter as quickly as possible. To do this, we will first concentrate on the function and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Hyundai Veloster and their origins.
What is the task and operation of the release bearing on Hyundai Veloster?
Role of the release bearing on Hyundai Veloster
The release bearing of your Hyundai Veloster has a major function in the operation of your entire gearbox system. In fact, its mission is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Hyundai Veloster.
Objective of release bearing Hyundai Veloster
Let’s now look at the technical side, the release bearing is composed of two units, a first fixed part that slides only when the stop is pulled, or pushed (determined by its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two distinct types of release bearing Hyundai Veloster :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two types of release bearing . This one, as opposed to the hydraulic style, is operated by a mechanical pulling system that will release the clutch disc. In this case, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more technical, is the type most used in contemporary automobiles. It is however more sophisticated than the pulled release bearing. In fact, it will be composed of a hydraulic tube that will receive the pressure right from the clutch pedal.
More conventional clutch stop
Release bearing noises Hyundai Veloster and their origins
I experience a release bearing noise on Hyundai Veloster every time I drive and it stops when I depress my clutch pedal
If you experience a noise from your gearbox, release bearing or clutch itself when your engine is running, but it stops when you press your clutch pedal, this noise often sounds like a bell noise, it is highly conceivable that your release bearing is the reason. Make sure that this noise stops when you disengage, in which situation it is time to change the release bearing of your Hyundai Veloster.
I experience a release bearing noise when my pedal is up and I experience jolts in my foot
If you experience too much or too little resistance when you press your clutch pedal, and it is associated with jolts that you can experience in your clutch pedal, then the stop/fork release/blades grouping is damaged. In fact, this noise often comes from the broken fork that no longer allows the system to function normally.
I experience a grinding noise coming from the release bearing of my Hyundai Veloster when I try to shift gears and they do not shift
This matter shows up most often on models equipped with hydraulic release bearing. It is often associated with a clutch pedal that has little or no resistance. If you are in this circumstance and you feel a grinding or cracking noise coming from the release bearing of your Hyundai Veloster, then you probably have a leak coming from your release bearing. It must therefore be swapped fairly quickly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Hyundai Veloster and it’s not from your release bearing, check this article to have more informations.
