When you come across unusual noises on your Hyundai Bayon you tend to stress about them. Specifically when you feel a noise when you accelerate on your Hyundai Bayon. It is immediately assimilated to an engine issue and can therefore be serious. As we know that you do not take these complications lightly, we have decided to publish this document to support you find the causes and get rid of this issues as quickly as possible. To do this, we will first see what are the reasons of a high pitched noise when accelerating with my Hyundai Bayon, then what is a whistling or ratling noise at the acceleration of my Hyundai Bayon, then the sources of a noise that intensifies during acceleration and at last a noise that ceases when I stop accelerating.
Ma Hyundai Bayon makes a high-pitched noise when I accelerate:
If your Hyundai Bayon produces a loud noise when you accelerate, it is quite possible that the alternator belt is the reason of your issue. You will need to determine if this noise happens suddenly and if it can stop as it started. The alternator belt is a wearing part that is employed to bring power to the secondary components of your Hyundai Bayon’s engine and although it is less vital than the timing belt it can generate engine problem if it stops working. This sound may be a warning sign of a slackened belt, in which case the tensioner roller or its wear and tear may be to blame. In any case, examine the state of your belt and its tension. If it causes this acceleration noise on Hyundai Bayon, go to your mechanic.
Ma Hyundai Bayon makes whining noise when I accelerate:
- Rattling or whistling noise generated by the turbo
- Humming noise caused by air leakage
If you have a power loss that occurs with the rattling noise when you accelerate with your Hyundai Bayon, it is plausible that your turbo is screwing up and some of its elements are at the end of their life. Check it and replace it if it is the reason, otherwise you risk blockage your engine in the long run. If you notice this blowing or whistling sound on your car, feel free to consult this document about turbo noises on Hyundai Bayon, if you would like more info.
If, on the other hand, you do not experience any power loss due to an humming noise on your Hyundai Bayon, it is more than likely that you have one of your junctions or air hoses that has holes. So examine the whole air supply system from your air filter to your engine to locate the starting point of this acceleration sound.
Ma Hyundai Bayon produces an increasingly loud noise when I accelerate:
If, on the other hand, you have the feeling that the more you gain speed, the more your noise at acceleration on Hyundai Bayon gets loud, then you will have to think about the rolling parts of your vehicle. In fact, if this loud noise does not appear when you iddle, it is necessarily linked to your transmission, and, in general, to your wheels. The most common cause is the state of your bearings, so don’t forget to examine their condition to make sure it is not the cause of this loud noise when you accelerate. If not, go to this article about the noises related to Hyundai Bayon noise wheels.
Ma Hyundai Bayon creates a noise when I accelerate that ends when I stop accelerating:
At last, if you encounter a noise when accelerating with your Hyundai Bayon and this noise which could be a cliking sound tends to stop when you disengage (press the clutch pedal), then one of the wear parts of your clutch system may be the cause. In fact, the clutch release bearings must be swapped almost every 120 000 / 130 000km. To evaluate it, you just have to see if you have more difficulty than every time shifting gears, if you feel a resistance either stronger or non-existent in the clutch pedal. If you have any of these signs of illness, go to your mechanic to change the clutch release bearings on your Hyundai Bayon. Go through our article on clutch noise on Hyundai Bayon for more information.
