Do you listen a metallic noise on your Seat Arona every time you drive? We know that this is not pleasant and that you have questions. Hearing such a noise is not always a good indication, but it may also be nothing severe. To help you resolve this issue, our team has decided to prepare this content page to help you in this search. In order to carry out this research as accurately as possible, we will first check out the plausible sources of metallic noise in the front of your vehicle, and then, if the metallic noise comes from the rear of your vehicle.
Metal noise Seat Arona coming from the front end of the vehicle
I perceive a metal rattling noise coming from wheels
- Metallic noise originating from your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely causes of metal noise manifestations on your Seat Arona, may be that one of your bearing is tired, it will tend to generate a loud noise that goes up when stressed (turns faster and faster). So remember to verify by taking speed (neutral gear and window open to be aware only to noise of the wheels) that the noise is well located here, if this is the case swap it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this report on loud noise on Seat Arona, you will most likely find a solution to your issue.
If you hear a metalic noise on Seat Arona and you have the feeling that it comes from your front wheels, it is highly plausible that it is your pads or discs that are the reason. Indeed, a disc or a set of dead plates will make a strong metallic friction noise that you will inevitably feel. To verify this, put your vehicle on safety stand, and verify the condition of your discs and pads by getting rid of the wheel. If they are involved, swap them quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your vehicle, and you want explications about it, browse this article for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you perceive a metallic noise on your Seat Arona, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will cause a metallic snap when they hit or change direction. To verify this, position yourself under your vehicle, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be changed. If this is your case, we encourage that you browse this content page for a complete guide about steering noises on Seat Arona.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are harmed, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Seat Arona. Once screwed up, they will no longer fulfill their task as shock absorbers and, with each impact, or violent acceleration, a noise will appear. Therefore, keep in mind to verify their status and swap them if needed. Feel free to read this content page which is a complete file about strut mounts noises on Seat Arona, how to verify their condition and swap them.
Finally, the last basic reason of metallic noise on Seat Arona. It’s because your transmission system is the source. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then generate a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we encourage that you browse this detailed guide on the origins of steering noises on Seat Arona.
Metallic noise Seat Arona coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you notice an exhaust noise that is more of a metallic type, it is plausible that one or more parts of your exhaust may be damaged. Indeed, it is plausible that either the catalyst or the silencer may be the reason of this noise. To be certain, go under the vehicle, cold, and knock each of the previously stated components with a hammer to discern the source of the noise. You should hear things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to consider changing it, as well as the silencer. In this instance, to eliminate the metallic noise on your Seat Arona, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your vehicle, it is plausible that with wear they are at the origin of your metallic noises on your Seat Arona. Go a little further up in the document where you will find information of the solution already exposed for the front part of the vehicle.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
