Do you experience a metallic noise on your GMC Canyon when ever you drive? We can understand that this is not enjoyable and that you are wandering. Finding out such a noise is not always a good indication, but it may also be nothing severe. To help you resolve this problem, our team has decided to compose this content to help you in this investigation. In order to execute this research as accurately as possible, we will first have a look at the possible sources of metallic noise in the front of your car, and then, if the metallic noise comes from the rear of your car.
Metal noise GMC Canyon coming from the front end of the car
I hear a metal rattling noise coming from wheels
- Metallic noise caused by your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely causes of metal noise symptoms on your GMC Canyon, may be that one of your bearing is tired, it will tend to make a loud noise that raises when stressed (turns faster and faster). So bear in mind to verify by taking speed (neutral gear and window open to concentrate only to noise of the wheels) that the noise is well located here, if this is the case replace it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this guide on loud noise on GMC Canyon, you will most likely find a remedy to your problem.
If you notice a metalic noise on GMC Canyon and you have the feeling that it comes from your front wheels, it is highly possible that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will generate a strong metallic friction noise that you will inevitably feel. To verify this, put your car on safety stand, and verify the state of your discs and pads by getting rid of the wheel. If they are involved, replace them promptly , otherwise you will no longer be able to brake. If you feel a metallic noise from your car, and you want explications about it, examine this guide for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you hear a metallic noise on your GMC Canyon, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To verify this, position yourself under your car, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be swapped. If this is your case, we recommend highly that you browse this content for a complete guide about steering noises on GMC Canyon.
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your GMC Canyon. Once screwed up, they will no longer fulfill their role as shock absorbers and, with each impact, or violent acceleration, a noise will come out. Therefore, keep in mind to verify their status and replace them if needed. Feel free to read this content which is a complete file about strut mounts noises on GMC Canyon, how to verify their state and change them.
Finally, the last common reason of metallic noise on GMC Canyon. It’s because your transmission system is the origin. It is plausible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then make a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we recommend highly that you look at this detailed guide on the sources of steering noises on GMC Canyon.
Metallic noise GMC Canyon coming from the rear end of the vehicle
If, on the other hand, you experience an exhaust noise that is more of a metallic type, it is possible that one or more parts of your exhaust may be damaged. In fact, it is possible that either the catalyst or the silencer may be the reason of this sound. To be certain, go under the car, cold, and knock each of the previously stated elements with a hammer to locate the origin of the noise. You should perceive things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to consider changing it, as well as the silencer. In this case, to eliminate the metallic noise on your GMC Canyon, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Brake pads or discs
As for the bearings of your car, it is possible that with wear they are at the origin of your metallic noises on your GMC Canyon. Go a little further up in the article where you will find details of the solution already exposed for the front part of the car.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.