Constantly listening noises from your vehicle is never pleasant, so listening wiper sounds on your GMC Canyon can be worrying. This symptom may be an indication of a small issue as well as a warning of a small fix to come. In any case, it is useful to find the origin and take the necessary measures to solve the issue, it is with this in mind that we desired to prepare this content page to support you see more clearly. We will first check out the conceivable causes and solutions for dealing with noise from your wipers on your GMC Canyon. Then, in a second step, we will give you some recommendations to prevent this type of noise from going on again.
Wiper blades that causes a squeaking or rubbing noise on GMC Canyon
A wiper noise on your GMC Canyon, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasant and can distract your concentration while you are driving. It is necessary to stop such a sound. Moreover, a wiper blade noise is in most cases the signal of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Explanations and solutions for wiper noise on your GMC Canyon
- Verify the wear of your wiper blades. This is the most common cause of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Reflect on replacing them in both cases.
- Dirty windshield, verify the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may perceive a wiper noise on your GMC Canyon, it is up to you to clean it with your windshield washer fluid if sufficient, otherwise use sodium bicarbonate to clean it, it is very practical.
- Verify that your wiper blades are well placed. In fact, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can verify these two points.
- Verify the tightness of the wiper arm device and that the friction between the windshield and the wipers is not too high. In fact, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your GMC Canyon shows up.
Some basic recommendations to limit wiper blades noise on your GMC Canyon
Finally, we will give you some suggestions and warnings to help you expand the life of your wipers and prevent unwanted noise they may cause during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. In fact, the purpose of the dishwashing liquid is not to wash windows, additionally if you wanted to use it for this task, you would have to rinse abundantly because it creates a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore experience an increase in the noise of these.
- Do not wax your windshield, the film that the wax will create may prevent you from seeing the road properly. In fact, this oily film will generate a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main cause for the noise generated by your windshield wipers, we encourage you not to drive in puddles after storms or heavy rain. In fact, the puddles will inevitably be full of dirt that will end up on your windshield and cause noise or deteriorate to your windshield wipers.