Sometimes your car can make noises in the front axle, you are very certainly not reassured by this sorts of noise and you instantly tend to think that you will lose a wheel or that the repair will cost you an massive sum. Thus, what if you uncover a noise coming from the front end of your Mazda MX 5 Miata? It may not be much and you can repair the problem yourself, but if in doubt it is better to examine before a larger failure happens. It is with this in mind that we have decided to compose this article and allow you to locate the problem and find a treatment. We will, through few steps review all the elements that can create noises at the front end of your Mazda MX 5 Miata. 
What are the elements that can cause front axle noise Mazda MX 5 Miata?
Most of our work will focus on finding the element that gives your Mazda MX 5 Miata front wheel noise. The following is a list of the components that are most likely to be making it and how to verify it.
Noise vibration front end Mazda MX 5 Miata : the shock absorber cup
One of the most classic reason of symptoms on your Mazda MX 5 Miata front axle noise is advanced wear and tear on your shock system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To examine if this is the problem that worries you, take a dented, slow-speed road and focus on the noise coming from your front end as you pass over holes. If these are the cups, consider replacing them quickly as this may affect other parts and require more costly repairs.
Noise while turning front end Mazda MX 5 Miata : stabilizer bar
If you know of a noise on your Mazda MX 5 Miata at the level of the front end when you are turning flat or going up on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is defective. To verify the origin of the problem, you may feel a lack of balance in the direction of the car (it pulls to the left or it pulls to the right). Furthermore, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Front axle noise when turning Mazda MX 5 Miata : direction triangles
Finally, you may have a noise in the front wheel on your Mazda MX 5 Miata, when you accelerate, brake or in a rather random but regular way. It is likely that the cause of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also examine the condition of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your mechanic.
Loud noise front end Mazda MX 5 Miata : bearings
One of the other likely origins of symptoms of the front axle of your Mazda MX 5 Miata, may be that one of your rollings is tired, it will tend to make a thumping noise that intensifies when it is under stress (turns faster and faster). So be sure you examine by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them quickly. If, on the other hand, this noise only appears with an engaged speed, refer to our article on loud noise on Mazda MX 5 Miata, you will probably find a fix to your problem.
Front end noise squeaking Mazda MX 5 Miata : cardan shaft
One of the most traditional causes when noise appears on the front axle of your Mazda MX 5 Miata when you turn with your car is connected to the direction of your car. Certainly, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Mazda MX 5 Miata, do not hesitate to consult this article to find the solution to your problem.
