Sometimes your car can make noises in the front right, you are very hardly ever reassured by this kind of noise and you directly begin to think that you will loose a wheel or that the repair will cost you an huge sum. Thus, what if you recognize a noise coming from the front right of your Hyundai Santa Fe? It may not be much and you can resolve the trouble yourself, but if in doubt it is better to check before a larger damage takes place. It is with this in mind that we have chosen to compose this document and allow you to find out the trouble and find a treatment. We will, through different steps review all the components that can generate noises at the front right of your Hyundai Santa Fe. 
What are the components that can cause front right noise Hyundai Santa Fe?
Most of our article will focus on finding the element that gives your Hyundai Santa Fe front wheel noise. The following is a list of the parts that are most likely to be making it and how to validate it.
Grinding noise front right wheel Hyundai Santa Fe : the shock absorber cup
One of the most classic reason of symptoms on your Hyundai Santa Fe front right wheel noise is advanced wear and tear on your shock device. In fact, the suspension cups, when they are dead, the rubber (silentblock) that works as a buffer and shock absorber for the upper part of the suspension no longer does its job and during small jolts that compress the suspensions. To check if this is the trouble that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front right as you pass over holes. If these are the cups, think about swapping them soon as this may affect other components and necessitate more expensive repairs.
Noise while turning front right Hyundai Santa Fe : stabilizer bar
If you find out a noise when turning on your front right wheel Hyundai Santa Fe at the level of the front right when you are turning flat or going up on sidewalks for example, it is most likely connected to one of the composents of your stabilizer bar that is defective. To validate the origin of the trouble, you may experience a lack of stability in the direction of the car (it pulls to the right or it pulls to the right). In addition, you can put yourself on the right side of your front wheels and try to shake your wheel strongly, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Front right noise when turning Hyundai Santa Fe : direction triangles
Finally, you may have a noise in the front right wheel on your Hyundai Santa Fe, when you speed up, brake or at any other random moment. It is likely that the reason of this trouble comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also check the state of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your technician.
Loud knocking or grinding noise front right Hyundai Santa Fe : bearings
One of the other probable origins of symptoms of the front right grinding or knocking noise on your Hyundai Santa Fe, may be that one of your bearging is tired, it will start to make a thumping noise that intensifies when it is under stress (turns faster and faster). So don’t forget to check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case change it or them soon. If, on the other hand, this noise only appears with an engaged speed, read our article on loud noises on Hyundai Santa Fe, you will most certainly find a response to your trouble.
Front right wheel noise squeaking Hyundai Santa Fe : cardan shaft
One of the most common causes when noise appears on the front right of your Hyundai Santa Fe when you turn with your car is related to the direction of your car. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Hyundai Santa Fe, do not hesitate to consult this article to find the solution to your problem.
