If you too have already feel a grinding noise on Volkswagen Touran 3, you must have wondering the same questions as all Volkswagen Touran 3 owners. We are rarely reassured when a grinding noise happens on our vehicle. As we are conscious of your concerns and questions, we have made a decision to write this article in order to assist you in and ease your investigation for a answer to your problem. To do this, first we will see what the origins of a grinding noise on Volkswagen Touran 3 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Volkswagen Touran 3 that originates from the shock absorbers and to finish from one of your doors.grinding-noise-volkswagen-touran-3

I notice a grinding noise on Volkswagen Touran 3 once I turn the wheel

First, we will have a look at the grinding noises on Volkswagen Touran 3 that take place every time you turn the wheel of your vehicle. Here are the main explanations for this:

  • Hydraulic system

    • If you notice grinding noises on your Volkswagen Touran 3 once you turn the wheels, it may be connected to the hydraulic system of your vehicle that allows you to operate the entire power steering part. In this instance, the main point to check is the power steering fluid level, which if below the normal level could be a sign of a leak of the unit. In this case, keep in mind to redo the level and check it frequently. If the problem is persistant, go to your auto mechanic.

  • Bearings

    • “A grinding noise on Volkswagen Touran 3 once I turn the wheels of my vehicle” can also result from premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the vehicle when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Remember to check their state.

  • Steering pump

    • Finally, a grinding noise on Volkswagen Touran 3 once I turn may be relating to a tired steering pump power steering pump. The goal of this organ is to operate the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may show up between it and the belt. Please remember to check that it is working properly.

    If despite these different possibilities you continue to hear a grinding noise on Volkswagen Touran 3 when turning your steering wheel, we have made a complete content on this subject that can help you discover the origin.

    I hear a grinding noise on Volkswagen Touran 3 once braking

    If you notice a grinding noise from the brakes of your Volkswagen Touran 3, it is highly conceivable that it will be caused by brake pads at the end of their life, in fact, the task of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but depending on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead they will have to be changed fairly quickly because they will fairly quickly damage your discs.
    If, despite crontrol, your grinding noise on Volkswagen Touran 3 does come from your brakes but is not connected to the pads, check this content page to find out the other plausible sources of brake noises on Volkswagen Touran 3.

    I notice a grinding noise on Volkswagen Touran 3 at the shock absorbers

    If you are in the scenario where you recognize the grinding noise on Volkswagen Touran 3 as coming from the damping part of your vehicle, whether you are driving over a retarder, on a bumpy road, or simply once you change direction and the vehicle’s mass is swung from one side to the other. In cases like this, there are several explanations that can justify this noise. In fact, you will have to check some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
    • You may experience abnormal wear and tear on one of the seals. This would end in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will generate a grinding noise on Volkswagen Touran 3

    at each compression.
    Once you have checked all these points, you should have found the source of your issue, go to your motor mechanic to fix the faulty component. If you have not located the source of your problem, we would suggest that you have a look at this content page which discusses all possible origins of shock absorber noise on Volkswagen Touran 3.

    I notice a grinding noise on Volkswagen Touran 3 at a door

    If that’s not enough, don’t hesitate to read this full content page on door sounds on Volkswagen Touran 3.
    It is plausible, depending on the kind of of noise you know, that the hinge of your door is at the source of these noises. If this is the case, you will have to verify it by opening your door and verifying that the grinding noise on your Volkswagen Touran 3 comes from a hinge that is too dry. To fix this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to have a look at this complete content page on door sounds on Volkswagen Touran 3.