It happens sometimes that your automobile makes noises from your brakes, you are certainly not reassured by this sort of noise and you instantly tend to think that you will have an accident or that the fix will cost you an substantial sum. So, what if you detect noise from the brake on your Volkswagen Touran 3? It may not be anything major and you might be able to solve it on your own, but when in doubt, as with such trouble your safety and the one from other is in question, it is better to examine before a more serious failure happens. It’s with idea in mind that we have chosen to compose this content and give you the chance to locate the trouble and find a solution. We will go through several steps, review all possible origins of brake noise on Volkswagen Touran 3, and offer you the causes for them in order to assist you solve the trouble.brake-noise-volkswagen-touran-3

The several kind of brake noise Volkswagen Touran 3 and their causes

The objective of the Volkswagen Touran 3 brakes is to come slow down and stop your vehicule. This element is an essential component of your car’s safety. Hearing a noise from it must therefore be looked into promptly and leaving it lying around is not a good solution.

I listen a grinding noise on my brake Volkswagen Touran 3

If you notice a grinding or scrap metal noise coming from the brake of your Volkswagen Touran 3, it is highly imaginable that it will be connected to brake pads at the end of their existence, actually, the role of the pads is to act as a buffer during braking and they will therefore logically wear out with time. Each manufacturer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may change. Remove the wheels in question and examine the wear indicator on them. If they are expired, they must be changed quickly as they will very easily damage your discs and keep doing this scrap or grinding noise on Volkswagen Touran 3. If after checking out this point, you’re still having a grinding noise on your Volkswagen Touran 3, have a look at this article to find a solution.

I encounter a uninterrupted noise that stops when I brake with my Volkswagen Touran 3

If you experience a uninterrupted noise from the brakes Volkswagen Touran 3 that only ends when you press your brake system, it is quite conceivable that caliper wear is the reason. In fact, they can jam with time, specifically if they are not employed enough. When this happens, they will tend to keep on being in the closed position, so they will always stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to think about swapping them.

I encounter vibration when I brake with my Volkswagen Touran 3

If in your case, you encounter a vibration when braking that would have come from the brake your Volkswagen Touran 3, you will have to feel concerned about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be substituted at some point. A vibration most often informs of veiled brake disc, you can examine it by disassembling your wheels. If so, swap them or have them replaced by your mechanic.

I experience a squealing noise when I brake with my Volkswagen Touran 3

Finally, if you notice a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Volkswagen Touran 3, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).