If you too have already discover a grinding noise on Fiat Fullback, you must have asked yourself the same questions as all Fiat Fullback owners. We are rarely reassured when a grinding noise comes out on our vehicle. As we are conscious of your fears and questions, we have chosen to produce this article content to be able to assist you in and facilitate your investigation for a answer to your problem. To do this, first we will see what the origins of a grinding noise on Fiat Fullback are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Fiat Fullback that comes from the shock absorbers and to finish from one of your doors.grinding-noise-fiat-fullback

I listen a grinding noise on Fiat Fullback once I turn the wheel

First, we will look at the grinding noises on Fiat Fullback that appear when you turn the wheel of your vehicle. Here are the main reasons for this:

  • Hydraulic system

    • If you discover grinding noises on your Fiat Fullback once you turn the wheels, it may be relating to the hydraulic system of your vehicle that allows you to operate the entire power steering part. In this instance, the main point to check is the power steering fluid level, which if below the normal level could be a sign of a leak of the system. In this case, think about to redo the level and check it frequently. If the problem lasts, go to your motor mechanic.

  • Bearings

    • “A grinding noise on Fiat Fullback once I turn the wheels of my vehicle” can also be a consequence of premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the vehicle when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can generate sounds close to a grinding if they are worn. Keep in mind to check their condition.

  • Steering pump

    • Finally, a grinding noise on Fiat Fullback once I turn may be associated with a tired steering pump power steering pump. The task of this organ is to run the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may appear between it and the belt. Please remember to check that it is working properly.

    If despite these different possibilities you continue to encounter a grinding noise on Fiat Fullback when turning your steering wheel, we have produced a complete article on this subject that can help you discover the origin.

    I perceive a grinding noise on Fiat Fullback once braking

    If you listen a grinding noise from the brakes of your Fiat Fullback, it is highly conceivable that it will be related to brake pads at the end of their life, in fact, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but according to your driving style and route, this may vary. Take out the wheels in question and check the wear indicator on them. If they are dead they will have to be replaced as soon as possible because they will as soon as possible damage your discs.
    If, despite verification, your grinding noise on Fiat Fullback does come from your brakes but is not relating to the pads, check this article content to find out the other possible origins of brake noises on Fiat Fullback.

    I listen a grinding noise on Fiat Fullback at the shock absorbers

    If you are in the scenario where you identify the grinding noise on Fiat Fullback as coming from the damping part of your vehicle, whether you are driving over a retarder, on a bumpy road, or simply once you change direction and the vehicle’s mass is swung from one side to the other. In such a case, there are several reasons that can explain this noise. Indeed, you will have to check some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
    • You may experience abnormal wear and tear on one of the seals. This would end in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Fiat Fullback

    at each compression.
    Once you have checked out all these areas, you should have found the source of your problem, go to your mechanic to repair the faulty part. If you have not discovered the source of your problem, we suggest that you have a look at this article content which discusses all possible origins of shock absorber noise on Fiat Fullback.

    I listen a grinding noise on Fiat Fullback at a door

    If that’s not enough, don’t hesitate to take a look at this full article content on door sounds on Fiat Fullback.
    It is possible, depending on the type of noise you experience, that the hinge of your door is at the source of these noises. If this is the case, you will have to verify it by opening your door and examining that the grinding noise on your Fiat Fullback comes from a hinge that is too dry. To resolve this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to check out this complete article content on door sounds on Fiat Fullback.