Occasionally your automobile can make noises in the front axle, you are very rarely reassured by this types of noise and you straightaway tend to think that you will lose a wheel or that the fix will cost you an huge sum. Thus, what if you recognize a noise coming from a gimbals of your Citroen Xantia? It may not be much and you can repair the problem yourself, but if in doubt it is better to check before a larger failure shows up. It is with this in mind that we have chosen to make this content and allow you to find the problem and find a solution. We will, through few steps review all the elements that can create noises at the front end of your Citroen Xantia. 
What are the elements that can cause a noise close to gimbals on Citroen Xantia?
Most of our article will focus on finding the element that gives your Citroen Xantia gimbals noise. The following is a list of the components that are most likely to be generating it and how to validate it.
Noise vibration that sounds like gimbals on Citroen Xantia : the shock absorber cup
One of the most likely reason of noises on Citroen Xantia that sounds like a gimbals is advanced wear and tear on your shock system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To check if this is the problem that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, consider replacing them as soon as possible as this may affect other parts and require more pricey repairs.
Noise while turning that sounds like gimbals Citroen Xantia : stabilizer bar
If you find out of a noise on your Citroen Xantia that sounds like a gimbals when you are turning flat or going up on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is defective. To validate the origin of the problem, you may feel a lack of balance in the direction of the automobile (it pulls to the left or it pulls to the right). Additionally, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Noise when turning Citroen Xantia : gimbals
One of the most traditional causes when noise shows upand sounds like gimbals on your Citroen Xantia when you turn with your automobile is linked to the direction of your automobile. In fact, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Citroen Xantia, do not hesitate to consult this article to find the solution to your problem.
