Being subject to constant noise on your vehicle tends to be irritating, a vehicle is so elaborate that it is constantly difficult to determine its origin and even more so to find the part that produces it. If you have already experienced a clicking noise on your Hyundai Elantra, we will almost certainly be able to support you. In fact, our editorial staff decided to write this content page in order to review the main causes of a clicking noise on Hyundai Elantra. This is why, firstly, we will look at what are the origins of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the origins of clicking noise on Hyundai Elantra coming from your suspensions.
I find out a clicking noise on Hyundai Elantra located on my engine
Check your high engine
If you find out a clicking noise on Hyundai Elantra, and this sound is based at the top of the engine, it means that it comes from your cylinder head and its accompanying parts. Two parts can be the triggers of these ticking noises on Hyundai Elantra. Either the hydraulic pushers , in most cases it is because of their faulty “hydraulic catch-up” system that we will notice these clicking noises, often when cold and go away when hot. Otherwise, it is the interplay of your rocker arms or their state of wear that is at issue. In this situation, remember to change them.
Check your low engine
If you have determined the region of origin of the Hyundai Elantra clikcing noises coming from your low engine, it may be that your rods or piston shafts are the triggers. In both situations, the risk in the long term is the breakage of the motor. These two fixes are very difficult and most mechanics will advise you to change the engine of your Hyundai Elantra.
Combustion problem
Finally, if you have the feeling that this clicking noise on Hyundai Elantra is connected to the combustion of your engine, there are three possible origins of it. Check the state of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is plausible that your timing belt is shifted and that it does not properly manage the timing of the various engine components to promote good combustion. And finally, the most classic cause, comes from your injection, which is either blocked or one or more injectors are damaged. In this case, do not hesitate to check this content page which deals in detail with the different injection sounds on Hyundai Elantra.
I find out a clicking noise on Hyundai Elantra in my direction
Check the state of the gimbals
One of the most regular reasons of a clicking noises in the direction of your Hyundai Elantra is linked with the direction of the vehicle. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can make a ticking type of sound when you get closer to the stop zone of your steering. A bellows with holes will affect the cardan shaft very quickly and must be swapped very quickly, otherwise the entire cardan shaft will have to be swapped. Consider taking a look at it. If you would like more detailed information about gimbals noises on Hyundai Elantra, do not hesitate to consult this complete guide.
Check the rest of your direction
Finally, when you find out a clicking noise on your Hyundai Elantra, it is plausible that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the case, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I find out a clicking noise on Hyundai Elantra coming from my suspensions
Check the suspension
If you encounter a clicking noise on your Hyundai Elantra each time you pass a speed bump, it is really plausible that your suspension block is the induce of the sound. In fact, it may be the suspension cups, which, when they are dead, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its role and during small jolts that compress the suspensions. To verify if this is the trouble that worries you, take a dented road and, at low speed, listen to the sound coming from your front axle when you pass over holes. If these are the cups, consider changing them as soon as possible as this may affect other parts and require more expensive repairs.
Check spring and cylinder
If you hear a clicking noise on your Hyundai Elantra at the suspension level, it is widely plausible that spring wear or shock cylinder deformation may be a cause. To verify the shape of the spring, position the automobile on a flat surface and measure that the heights from the ground to the bottom of the body are equivalent on each side (empty car for measurement). You can also verify between the front and rear, if there is a gap too large it denotes that most likely your springs are worn, if you see a leak go a little further in the article to have the answer to this problem. For the cylinder the verification is visual, be sure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should think about changing it or them. If you have the feeling that this noise is more like a squeaking noise on Hyundai Elantra than a clicking noise, don’t hesitate to consult this article.
