Being subject to frequent noise on your vehicle tends to be frustrating, a vehicle is so sophisticated that it is usually difficult to determine its origin and even more so to find the part that produces it. If you have already experienced a clicking noise on your GMC Canyon, we will most likely be able to help you. In fact, our editorial staff decided to compose this article in order to review the main causes of a clicking noise on GMC Canyon. This is why, firstly, we will see what are the origins of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the sources of clicking noise on GMC Canyon coming from your suspensions.
I find out a clicking noise on GMC Canyon on my engine
Check your high engine
If you find out a clicking noise on GMC Canyon, and this sound is located at the top of the engine, it means that it comes from your cylinder head and its accompanying parts. Two elements can be the causes of these ticking noises on GMC Canyon. Either the hydraulic pushers , generally it is because of their faulty “hydraulic catch-up” system that we will notice these clicking noises, often when cold and vanish when hot. Otherwise, it is the interplay of your rocker arms or their condition of wear that is at issue. In this situation, remember to change them.
Check your low engine
If you have identified the region of origin of the GMC Canyon clikcing noises coming from your low engine, it may be that your rods or piston shafts are the causes. In both circumstances, the risk in the long term is the breakage of the motor. These two fixes are very complex and most mechanics will advise you to swap the engine of your GMC Canyon.
Combustion problem
Finally, if you have the feeling that this clicking noise on GMC Canyon is connected to the combustion of your engine, there are three possible origins of it. Check the state of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is conceivable that your timing belt is shifted and that it does not properly manage the timing of the various engine elements to promote good combustion. And finally, the most classic trigger, comes from your injection, which is either blocked or one or more injectors are injured. In this case, do not hesitate to read this article which deals in detail with the different injection sounds on GMC Canyon.
I find out a clicking noise on GMC Canyon in my direction
Check the state of the gimbals
One of the most common triggers of a clicking noises in the direction of your GMC Canyon is linked with the direction of the vehicle. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can generate a ticking type of sound when you get closer to the stop zone of your steering. A bellows with holes will damage the cardan shaft very quickly and must be changed very quickly, otherwise the entire cardan shaft will have to be changed. Consider taking a look at it. If you would like more detailed information about gimbals noises on GMC Canyon, do not hesitate to consult this complete guide.
Check the rest of your direction
Finally, when you detect a clicking noise on your GMC Canyon, it is conceivable that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the case, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I find out a clicking noise on GMC Canyon coming from my suspensions
Check the suspension
If you experience a clicking noise on your GMC Canyon once you pass a speed bump, it is extremely conceivable that your suspension block is the reason of the sound. In fact, it may be the suspension cups, which, when they are dead, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its role and during small jolts that compress the suspensions. To examine if this is the problem that worries you, take a dented road and, at low speed, listen to the sound originating from your front axle when you pass over holes. If these are the cups, consider changing them soon as this may damage other parts and require more expensive repairs.
Check spring and cylinder
If you are subject to a clicking noise on your GMC Canyon at the suspension level, it is widely conceivable that spring wear or shock cylinder deformation may be a explanation. To examine the shape of the spring, place the car on a flat surface and measure that the heights from the ground to the bottom of the body are identical on each side (empty car for measurement). You can also examine between the front and rear, if there is a gap too significant it means that most likely your springs are worn, if you find out a leak go a little further in the article to have the solution to this problem. For the cylinder the verification is visual, be sure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should think about changing it or them. If you have the feeling that this noise is more like a squeaking noise on GMC Canyon than a clicking noise, don’t hesitate to consult this article.
