If you find out about a noise on your car, you are right to get worried about that and take it seriously, although it is possible that nothing major will happen from it, it is also imaginable that it is the first indication of a more significant service. A noise that shows up on a door of your GMC Canyon fortunately shows a slight modification / repair, rather than a complex repair. In order to support you in your procedure, we have chosen to produce this document to provide you the most likely solutions to your issue. Primary, we will take a look at the different origin noises of air in the door of your GMC Canyon, then hinge noises and finally at other possible possibilities.
Door air noise GMC Canyon
Plastic air cache noise
If you encounter air noise on the doors of your GMC Canyon, it is possible that it is linked to some plastic covers on the inside walls of your door. These can come loose, hole, fall and thus produce an air intake that will obviously make a significant and unpleasant air noise in the passenger compartment. To confirm that you don’t have this trouble on your GMC Canyon, open your doors and check the sides of them carefully, see if all the covers are properly installed.
Air noise seal
Air noise at the doors of your GMC Canyon can also be linked to a gasketfailing or overused. Certainly, the door seal, in addition to have a protective role against moisture infiltration, also has a protective role for air inlets in the passenger compartment. When it is worn, it will not settle and therefore no longer generate a perfect seal between the door and the car body. To examine its condition, there are two ways, first, visually check the state of the seal and for the second test, install someone inside the passenger compartment and door by door, car closed, sprayed with water the seals to see if water penetrates. If you are in this case, go to your mechanic to have your seal replaced and the door noise on your GMC Canyon adjusted.
Hinge noise door hinge GMC Canyon
Door noise GMC Canyon, dry hinge
It is possible, depending on the kind of of noise you experience, that your hinge is at the origin of them. If this is the case, you will have to examine it by opening your door and checking that the door noise on your GMC Canyon comes from a hinge that is too dry. To correct this issue, first try to grease the hinge, in most cases this is enough to solve your trouble.
Noise porte GMC Canyon, worn hinge
If you have followed our initial advice relating to your hinge, but the trouble still continues, it is plausible that your hinge is worn out and requires a change. In this circumstance, examine that despite the lubrication it still generates a lot of noise when opening and closing. You should feel a “clack” and restraint in the movement. If this GMC Canyon noise is your problem, change your hinge.
Internal part of the broken window regulator
In the other possibilities that can cause door noise on GMC Canyon, we can first think of the window lift, actually, after the hinge, it is the second advanced mechanism of the door. If broken, it can cause vibration or even air noise. To examine its condition, remove the door trim and check that no parts are broken.
Finally, one of the last possible possibilities for GMC Canyon door noise would come from a from your vehicle’s speakers. In fact, they take place in the door and can, over time, loosen and generate a distinctive vibration and risk damaging themselves if you do not secure them again. Same technique, you will have to dismantle the door trim to check its correct positioning.
If you can’t find solutions among this article, don’t hesitate to take your vehicle to your mechanic who can test your car in more detail to discover what the particular trouble is that you know.