On occasion your vehicle can produce sounds in the front right, you are very hardly ever reassured by this kind of noise and you straightaway start to presume that you will loose a wheel or that the repair will cost you an massive amount. Then, what if you discern a noise coming from the front right of your Chevrolet HHR? It may not be much and you can repair the trouble yourself, but if in doubt it is better to verify before a larger problem appears. It is with this in mind that we have chosen to produce this document and allow you to find out the trouble and find a treatment. We will, through different steps review all the components that can produce noises at the front right of your Chevrolet HHR.
What are the elements that can provoke front right noise Chevrolet HHR?
Most of our article will focus on finding the component that gives your Chevrolet HHR front wheel noise. The following is a list of the elements that are most likely to be generating it and how to validate it.
Grinding noise front right wheel Chevrolet HHR : the shock absorber cup
One of the most common causes of symptoms on your Chevrolet HHR front right wheel noise is advanced wear and tear on your shock unit. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its purpose and during small jolts that compress the suspensions. To verify if this is the trouble that worries you, take a dented, slow-speed road and pay attention to the noise coming from your front right as you pass over holes. If these are the cups, think about replacing them quickly as this may damage other parts and require more pricey repairs.
Noise while turning front right Chevrolet HHR : stabilizer bar
If you know a noise when turning on your front right wheel Chevrolet HHR at the level of the front right when you are turning flat or climbing on sidewalks for example, it is most likely connected to one of the elements of your stabilizer bar that is malfunctioning. To validate the source of the trouble, you may experience a lack of balance in the direction of the vehicle (it pulls to the right or it pulls to the right). Also, you can put yourself on the right side of your front wheels and try to shake your wheel powerfully, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Front right noise when turning Chevrolet HHR : direction triangles
Finally, you may have a noise in the front right wheel on your Chevrolet HHR, when you increase the speed of, brake or at any other random moment. It is likely that the reason of this trouble comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also verify the state of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your auto technician.
Loud knocking or grinding noise front right Chevrolet HHR : bearings
One of the other possible causes of symptoms of the front right grinding or knocking noise on your Chevrolet HHR, may be that one of your bearging is tired, it will start to make a thumping noise that raises when it is under stress (turns faster and faster). So be sure you verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case change it or them quickly. If, on the other hand, this noise only happens with an engaged speed, refer to our article on loud noises on Chevrolet HHR, you will certainly find a response to your trouble.
Front right wheel noise squeaking Chevrolet HHR : cardan shaft
One of the most traditional causes when noise happens on the front right of your Chevrolet HHR when you turn with your vehicle is linked to the direction of your vehicle. Certainly, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Chevrolet HHR, do not hesitate to consult this article to find the solution to your problem.