You listen a starter motor noise on your Volkswagen Touran 3 once you start your vehicle. We can understand that this is not enjoyable and that you have inquiries. Discovering such a noise is not always a good indication, but it may also be nothing serious. To assist you resolve this problem, our team has decided to prepare this article content to help you in this research. First, we will describe how the starter motor works on your Volkswagen Touran 3, and then what starter motor noises you can notice on your Volkswagen Touran 3.
Functioning and various information
Function of a starter motor on Volkswagen Touran 3
The starter motor is an electric motor whose sole function is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Volkswagen Touran 3 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Volkswagen Touran 3
- Do not try to start your engine for too long
- Do not use a starter motor on Volkswagen Touran 3 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is exhausted, you always want to start your car, the energy it is capable of holding may not be enough to give the power required by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not fix the reason of your failure to start repeatedly, your starter may be the future part you will have to replace.
I listen noises from the starter motor of my Volkswagen Touran 3, what are the causes?
I encounter a loud noise from the starter of my Volkswagen Touran 3
If you experience a starter motor noise on Volkswagen Touran 3 and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the source of it. Indeed, often when the part has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be optimal, in which situation the gears will be worn down over time and will not slip and will no longer properly activate the engine when starting. Check the state of the drive pinion, if it is the element responsible of the starter motor noise on your Volkswagen Touran 3 swap it.
If it is a noise in the front of your car but it seems to you after reviewing not to come from your starter, browse this article content about front end noise on Volkswagen Touran 3 which may provide you other leads to eliminate your noise problem.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Volkswagen Touran 3
If you listen a clicking noise at the starter motor of your Volkswagen Touran 3, there are two possible failures linked to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a problem with unplugged cable examine your electrical installation. If after looking at this clicking noise on Volkswagen Touran 3 doesn’t come from your starter motor, check this article for more informations.
