It occurs in some cases that your automobile makes noises in the brake calipers, you are almost never reassured by this sorts of noise and you instantly tend to think that you will have an incident or that the repair will cost you an substantial amount of money. So, what if you detect noise from the brake calipers on your Peugeot Partner? It might not be anything major and you may be able to fix it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to check before a more serious failure happens. It is with this in mind that we have chosen to write this content and give you the opportunity to find the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Peugeot Partner, and give you the causes for them in order to help you fix the issue.
The different types of brake caliper noise on Peugeot Partner and their causes
The function of the Peugeot Partner brake calipers is to come pinch the brake discs of your Peugeot Partner thanks to the pads they will activate. This element is an fundamental element of your vehicle’s safety. Discovering a noise from it must therefore be examined right away and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Peugeot Partner
If you find out a grinding or scrap metal noise coming from the brake calipers of your Peugeot Partner, it is highly possible that it will be caused by brake pads at the end of their life, in fact, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but according to your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be changed quickly as they will quickly damage your discs and keep doing this scrap or grinding noise on Peugeot Partner. If after checking out this point, you’re still encountering a grinding noise on your Peugeot Partner, have a look at this article to find a solution.
I encounter a continuing noise that stops when I brake from my Peugeot Partner brake calipers
If you are the victim of a continual noise in the brake calipers of your Peugeot Partner that only stops when you press your brake system, it is quite possible that caliper wear is the cause. In fact, they can jam after some time, specifically if they are not employed enough. When this happens, they will tend to stay in the closed situation, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Peugeot Partner
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Peugeot Partner, you will have to get worried about the state of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be substituted at some point. A vibration most often informs of veiled brake disc, you can check it by disassembling your wheels. If so, replace them or have them replaced by your technician.
When I brake, I encounter a squealing in my brake calipers of my Peugeot Partner
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Peugeot Partner, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
