It happens sometimes that your automobile makes noises in the brake calipers, you are pretty much never reassured by this kind of noise and you immediately tend to think that you will have an incident or that the fix will cost you an substantial amount. So, what if you discern noise from the brake calipers on your Peugeot 108? It may not be anything severe and you may be able to solve it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to check before a more serious failure occurs. It is with this in mind that we have made the decision to write this content and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Peugeot 108, and give you the reasons for them in order to help you resolve the issue.
The different types of brake caliper noise on Peugeot 108 and their causes
The objective of the Peugeot 108 brake calipers is to come pinch the brake discs of your Peugeot 108 thanks to the pads they will activate. This element is an fundamental element of your vehicle’s safety. Hearing a sound from it must therefore be looked into right away and leaving it lying around is not a good alternative.
I hear a grinding noise on my brake calipers on Peugeot 108
If you notice a grinding or scrap metal noise coming from the brake calipers of your Peugeot 108, it is highly possible that it will be caused by brake pads at the end of their existence, actually, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each company gives an average runtime in kilometres for pads, but according to your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be swapped quickly as they will very easily affect your discs and keep doing this scrap or grinding noise on Peugeot 108. If after checking this point, you’re still having a grinding noise on your Peugeot 108, have a look at this article to find a solution.
I experience a continuous noise that stops when I brake from my Peugeot 108 brake calipers
If you are the victim of a constant noise in the brake calipers of your Peugeot 108 that only stops when you press your brake system, it is quite possible that caliper wear is the reason. Indeed, they can jam after some time, specifically if they are not used enough. When this happens, they will tend to stay in the closed position, so they will always stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Peugeot 108
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Peugeot 108, you will have to get worried about the state of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be substituted at some point. A vibration most often shows of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your auto mechanic.
When I brake, I experience a squealing in my brake calipers of my Peugeot 108
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Peugeot 108, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
