It occurs in some cases that your automobile makes noises in the brake calipers, you are rarely reassured by this types of noise and you automatically tend to think that you will have an accident or that the repair will cost you an astronomical amount. So, what if you detect noise from the brake calipers on your Chevrolet Equinox? It most likely is not some thing severe and you may be able to repair it yourself, but when in doubt, since your safety and the one of others is in question, it is better to examine before a more serious failure occurs. It is with this in mind that we have chosen to create this content and give you the chance to find the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Chevrolet Equinox, and give you the reasons for them in order to help you fix the trouble.
The different types of brake caliper noise on Chevrolet Equinox and their causes
The objective of the Chevrolet Equinox brake calipers is to come pinch the brake discs of your Chevrolet Equinox thanks to the pads they will activate. This element is an important element of your vehicle’s safety. Discovering a noise from it must therefore be investigated right away and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Chevrolet Equinox
If you listen to a grinding or scrap metal noise coming from the brake calipers of your Chevrolet Equinox, it is highly imaginable that it will be related to brake pads at the end of their life, in fact, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be changed quickly as they will quickly affect your discs and keep doing this scrap or grinding noise on Chevrolet Equinox. If after checking this point, you’re still enduring a grinding noise on your Chevrolet Equinox, have a look at this article to find a solution.
I experience a frequent noise that stops when I brake from my Chevrolet Equinox brake calipers
If you are the victim of a continual noise in the brake calipers of your Chevrolet Equinox that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. Indeed, they can jam after some time, specifically if they are not used enough. When this happens, they will tend to stay on in the closed situation, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Chevrolet Equinox
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Chevrolet Equinox, you will have to get worried about the condition of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be changed at some point. A vibration most often shows of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your auto technician.
When I brake, I experience a squealing in my brake calipers of my Chevrolet Equinox
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Chevrolet Equinox, creating a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
