Sometimes your car can produce noises in the front right, you are very almost never reassured by this sort of noise and you instantly start to think that you will loose a wheel or that the fix will cost you an massive amount. Then, what if you uncover a noise coming from the front right of your BMW X6? It may not be much and you can repair the problem yourself, but if in doubt it is better to check before a larger problem takes place. It is with this in mind that we have decided to make this content and allow you to locate the problem and find a treatment. We will, through several steps review all the elements that can make noises at the front right of your BMW X6. front-right-noise-bmw-x6

What are the parts that can generate front right noise BMW X6?

Most of our work will focus on finding the element that gives your BMW X6 front wheel noise. The following is a list of the elements that are most likely to be causing it and how to validate it.

Grinding noise front right wheel BMW X6 : the shock absorber cup

One of the most classic causes of symptoms on your BMW X6 front right wheel noise is advanced wear and tear on your shock device. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that works as a buffer and shock absorber for the upper part of the suspension no longer assumes its task and during small jolts that compress the suspension systems. To check if this is the problem that worries you, take a dented, slow-speed road and listen to the noise coming from your front right as you pass over holes. If these are the cups, think about replacing them soon as this may affect other components and necessitate more expensive repairs.

Noise while turning front right BMW X6 : stabilizer bar

If you find out a noise when turning on your front right wheel BMW X6 at the level of the front right when you are turning flat or climbing on sidewalks for example, it is most likely connected to one of the composents of your stabilizer bar that is malfunctioning. To validate the source of the problem, you may experience a lack of stability in the direction of the vehicle (it pulls to the right or it pulls to the right). Also, you can position yourself on the right side of your front wheels and try to shake your wheel powerfully, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your garage.

Front right noise when turning BMW X6 : direction triangles

Finally, you may have a noise in the front right wheel on your BMW X6, when you increase the speed of, brake or at any other random moment. It is likely that the reason of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also check the state of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your mechanic.

Loud knocking or grinding noise front right BMW X6 : bearings

One of the other likely causes of symptoms of the front right grinding or knocking noise on your BMW X6, may be that one of your bearging is tired, it will start to make a thumping noise that intensifies when it is under stress (turns faster and faster). So make sure you check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them soon. If, on the other hand, this noise only appears with an engaged speed, check out our article on loud noises on BMW X6, you will probably find an answer to your problem.

Front right wheel noise squeaking BMW X6 : cardan shaft

One of the most traditional causes when noise appears on the front right of your BMW X6 when you turn with your vehicle is linked to the direction of your vehicle. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on BMW X6, do not hesitate to consult this article to find the solution to your problem.