In some cases your automobile can make sounds in the front right, you are very hardly ever reassured by this kind of noise and you immediately begin to think that you will loose a wheel or that the repair will cost you an huge amount. Then, what if you detect a noise coming from the front right of your Acura TSX? It may not be much and you can resolve the problem yourself, but if in doubt it is better to check before a larger problem occurs. It is with this in mind that we have decided to write this document and allow you to find out the problem and find a solution. We will, through some steps review all the elements that can generate noises at the front right of your Acura TSX. 
What are the parts that can create front right noise Acura TSX?
Most of our article will focus on finding the part that gives your Acura TSX front wheel noise. The following is a list of the parts that are most likely to be causing it and how to confirm it.
Grinding noise front right wheel Acura TSX : the shock absorber cup
One of the most likely reason of symptoms on your Acura TSX front right wheel noise is advanced wear and tear on your shock system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its task and during small jolts that compress the suspensions. To check if this is the problem that worries you, take a dented, slow-speed road and focus on the noise coming from your front right as you pass over holes. If these are the cups, consider changing them quickly as this may damage other parts and require more pricey repairs.
Noise while turning front right Acura TSX : stabilizer bar
If you know a noise when turning on your front right wheel Acura TSX at the level of the front right when you are turning flat or going up on sidewalks for example, it is most likely related to one of the elements of your stabilizer bar that is faulty. To confirm the source of the problem, you may feel a lack of stability in the direction of the car (it pulls to the right or it pulls to the right). Furthermore, you can put yourself on the right side of your front wheels and try to shake your wheel powerfully, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Front right noise when turning Acura TSX : direction triangles
Finally, you may have a noise in the front right wheel on your Acura TSX, when you accelerate, brake or at any other random moment. It is likely that the cause of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also check the condition of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your technician.
Loud knocking or grinding noise front right Acura TSX : bearings
One of the other probable origins of symptoms of the front right grinding or knocking noise on your Acura TSX, may be that one of your bearging is tired, it will start to make a thumping noise that intensifies when it is under stress (turns faster and faster). So remember to check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them quickly. If, on the other hand, this noise only shows up with an engaged speed, consult our article on loud noises on Acura TSX, you will most certainly find an answer to your problem.
Front right wheel noise squeaking Acura TSX : cardan shaft
One of the most traditional causes when noise shows up on the front right of your Acura TSX when you turn with your car is connected to the direction of your car. Indeed, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Acura TSX, do not hesitate to consult this article to find the solution to your problem.
