If you too have already discover a grinding noise on Chevrolet Cruze, you must have asked yourself the same questions as all Chevrolet Cruze owners. We are rarely reassured when a grinding noise occurs on our car. As we are conscious of your doubts and questions, we have chosen to create this content page in order to assist you in and facilitate your quest for a remedy to your trouble. To do this, first we will see what the origins of a grinding noise on Chevrolet Cruze are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Chevrolet Cruze that originates from the shock absorbers and to finish from one of your doors.grinding-noise-chevrolet-cruze

I notice a grinding noise on Chevrolet Cruze when ever I turn the wheel

First, we will have a look at the grinding noises on Chevrolet Cruze that arise every time you turn the wheel of your car. Here are the main causes for this:

  • Hydraulic system

    • If you are subject to grinding noises on your Chevrolet Cruze when ever you turn the wheels, it may be connected to the hydraulic system of your car that allows you to operate the entire power steering part. In cases like this, the main point to check is the power steering fluid level, which if below the normal level could be an indication of a leak of the device. In this case, think about to redo the level and check it frequently. If the trouble remains, go to your auto technician.

  • Bearings

    • “A grinding noise on Chevrolet Cruze when ever I turn the wheels of my car” can also result from premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Think about to check their condition.

  • Steering pump

    • Finally, a grinding noise on Chevrolet Cruze when ever I turn may be linked to a tired steering pump power steering pump. The mission of this organ is to run the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may occur between it and the belt. Keep in mind to check that it is working properly.

    If despite these different possibilities you continue to hear a grinding noise on Chevrolet Cruze when turning your steering wheel, we have produced a complete article on this subject that can help you discover the origin.

    I acknowledge a grinding noise on Chevrolet Cruze when ever braking

    If you notice a grinding noise from the brakes of your Chevrolet Cruze, it is highly conceivable that it will be associated with brake pads at the end of their life, indeed, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Take out the wheels in question and check the wear indicator on them. If they are dead they will have to be swapped fairly quickly because they will fairly quickly damage your discs.
    If, despite verification, your grinding noise on Chevrolet Cruze does come from your brakes but is not connected to the pads, check this article content to find out the other possible sources of brake noises on Chevrolet Cruze.

    I notice a grinding noise on Chevrolet Cruze at the shock absorbers

    If you are in the scenario where you discover the grinding noise on Chevrolet Cruze as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply when ever you change direction and the vehicle’s mass is swung from one side to the other. In such a case, there are several causes that can explain this noise. In fact, you will have to check some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would end in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Chevrolet Cruze

    at each compression.
    Once you have checked all these elements, you should have found the origin of your issue, go to your motor mechanic to repair the malfunctioning component. If you have not found the origin of your trouble, we recommend that you look at this article content which discusses all possible origins of shock absorber noise on Chevrolet Cruze.

    I notice a grinding noise on Chevrolet Cruze at a door

    If that’s not enough, don’t hesitate to read this full article content on door sounds on Chevrolet Cruze.
    It is possible, depending on the kind of of noise you acknowledge, that the hinge of your door is at the origin of these noises. If this is the case, you will have to examine it by opening your door and examining that the grinding noise on your Chevrolet Cruze comes from a hinge that is too dry. To solve this trouble, first try to grease the hinge, in most cases this is enough to solve your trouble. If that’s not enough, don’t hesitate to have a look at this complete article content on door sounds on Chevrolet Cruze.