If you too have already feel a grinding noise on Dodge Avenger, you must have wondering the same questions as all Dodge Avenger owners. We are rarely reassured when a grinding noise occurs on our vehicle. As we are conscious of your doubts and questions, we have chosen to prepare this article content in order to assist you in and facilitate your quest for a solution to your trouble. To do this, first we will see what the sources of a grinding noise on Dodge Avenger are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Dodge Avenger that comes from the shock absorbers and to finish from one of your doors.
I notice a grinding noise on Dodge Avenger when I turn the wheel
First, we will look into the grinding noises on Dodge Avenger that arise every time you turn the wheel of your vehicle. Here are the main reasons for this:
- Hydraulic system
- Bearings
- Steering pump
- You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
- You may encounter abnormal wear and tear on one of the seals. This would result in an oil leak
- Finally you can have one of your shock absorber cylinders deformed, which will make a grinding noise on Dodge Avenger
If you are subject to grinding noises on your Dodge Avenger when you turn the wheels, it may be relating to the hydraulic system of your vehicle that allows you to run the entire power steering part. In cases like this, the main point to verify is the power steering fluid level, which if below the normal level could be a sign of a leak of the unit. In this case, bear in mind to redo the level and verify it frequently. If the trouble remains, go to your auto technician.
“A grinding noise on Dodge Avenger when I turn the wheels of my vehicle” can also result from premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the vehicle when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can generate sounds close to a grinding if they are worn. Take into account to verify their condition.
Finally, a grinding noise on Dodge Avenger when I turn may be connected to a tired steering pump power steering pump. The task of this organ is to operate the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may occur between it and the belt. Remember to verify that it is working properly.
If despite these different possibilities you continue to notice a grinding noise on Dodge Avenger when turning your steering wheel, we have created a complete article content on this subject that can help you locate the origin.
I acknowledge a grinding noise on Dodge Avenger when braking
If you notice a grinding noise from the brakes of your Dodge Avenger, it is highly possible that it will be related to brake pads at the end of their life, actually, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Take out the wheels in question and verify the wear indicator on them. If they are dead they will have to be changed quickly because they will quickly damage your discs.
If, despite verification, your grinding noise on Dodge Avenger does come from your brakes but is not relating to the pads, verify this article content to find out the other conceivable origins of brake noises on Dodge Avenger.
I notice a grinding noise on Dodge Avenger at the shock absorbers
If you are in the situation where you discover the grinding noise on Dodge Avenger as coming from the damping part of your vehicle, whether you are driving over a retarder, on a bumpy road, or simply when you change direction and the vehicle’s mass is swung from one side to the other. In this instance, there are several reasons that can justify this noise. Indeed, you will have to verify some points, here they are:
at each compression.
Once you have checked out all these areas, you should have found the source of your problem, go to your technician to repair the faulty component. If you have not found the source of your trouble, we suggest that you have a look at this article content which discusses all possible origins of shock absorber noise on Dodge Avenger.
I notice a grinding noise on Dodge Avenger at a door
If that’s not enough, don’t hesitate to read this complete article content on door sounds on Dodge Avenger.
It is conceivable, based on the kind of of noise you know, that the hinge of your door is at the origin of these noises. If this is the case, you will have to verify it by opening your door and verifying that