Being subject to recurring noise on your automobile tends to be irritating, a automobile is so elaborate that it is usually difficult to determine its origin and even more so to find the part that generates it. If you have already experienced a clicking noise on your Acura TLX, we will almost certainly be able to help you. Indeed, our editorial staff decided to write this content page in order to review the main causes of a clicking noise on Acura TLX. This is why, firstly, we will see what are the reasons of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the sources of clicking noise on Acura TLX coming from your suspensions.
I find out a clicking noise on Acura TLX from my engine
Verify your high engine
If you find out a clicking noise on Acura TLX, and this sound is based at the top of the engine, it means that it comes from your cylinder head and its associated parts. Two elements can be the causes of these ticking noises on Acura TLX. Either the hydraulic pushers , in general it is because of their faulty “hydraulic catch-up” system that we will hear these clicking noises, often when cold and vanish when hot. Otherwise, it is the interplay of your rocker arms or their condition of wear that is at issue. In this case, remember to change them.
Verify your low engine
If you have founded the area of origin of the Acura TLX clikcing noises coming from your low engine, it may be that your rods or piston shafts are the causes. In both situations, the risk in the long term is the breakage of the motor. These two fixes are very complex and most mechanics will advise you to change the engine of your Acura TLX.
Combustion problem
Finally, if you have the feeling that this clicking noise on Acura TLX is in connection with the combustion of your engine, there are three possible causes of it. Verify the condition of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is possible that your timing belt is shifted and that it does not properly manage the timing of the various engine parts to promote good combustion. And finally, the most classic reason, comes from your injection, which is either blocked or one or more injectors are damaged. In this case, do not hesitate to read this content page which deals in detail with the different injection sounds on Acura TLX.
I find out a clicking noise on Acura TLX in my direction
Verify the condition of the gimbals
One of the most regular triggers of a clicking noises in the direction of your Acura TLX is connected to the direction of the automobile. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can make a ticking type of sound when you approach the stop zone of your steering. A bellows with holes will damage the cardan shaft very quickly and must be replaced in a short time, otherwise the entire cardan shaft will have to be replaced. Consider taking a look at it. If you would like more detailed information about gimbals noises on Acura TLX, do not hesitate to read this complete guide.
Verify the rest of your direction
Finally, when you experience a clicking noise on your Acura TLX, it is possible that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the case, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I find out a clicking noise on Acura TLX coming from my suspensions
Verify the suspension
If you encounter a clicking noise on your Acura TLX once you pass a speed bump, it is very possible that your suspension block is the reason of the sound. Indeed, it may be the suspension cups, which, when they are dead, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its role and during small jolts that compress the suspensions. To verify if this is the trouble that concerns you, take a dented road and, at low speed, focus on the sound originating from your front axle when you pass over holes. If these are the cups, consider changing them soon as this may affect other parts and require more expensive repairs.
Check spring and cylinder
If you are subject to a clicking noise on your Acura TLX at the suspension level, it is widely possible that spring wear or shock cylinder deformation may be a explanation. To verify the state of the spring, position the car on a flat surface and measure that the heights from the ground to the bottom of the body are similar on each side (empty car for measurement). You can also verify between the front and rear, if there is a gap too significant it denotes that most likely your springs are worn, if you find out a leak go a little further in the article to have the solution to this problem. For the cylinder the verification is visual, make sure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should think about changing it or them. If you have the feeling that this noise is more like a squeaking noise on Acura TLX than a clicking noise, don’t hesitate to consult this article.
