It is never pleasurable to listen to a sound on your automobile that you don’t know where it comes from. You may be thinking about what to do when you detect a reversing gear noise that continues on your skoda yeti? Any gearbox issue can be severe, but before making sure, it is better to do a few inspections. Our team has written this paper to help you solve it. First, we will see what the sources and the different gearbox noises can be on skoda yeti, and second, what are the solutions available to you.
Classical reverse skoda yeti noises and some tips to protect your gearbox
Why does the reversing of my skoda yeti make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The sound created by the reversing of your skoda yeti is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears chosen for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. In fact, the pressure you will apply on the gears will be enormous and you will create a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely normal if you hear a reverse noise on your skoda yeti if you shift gear under these conditions.
Different skoda yeti reversing noises and their triggers
Finally in this section, we will move on to what you are probably most enthusiastic about in this document, to learn about the source of reversing noise on skoda yeti. Here are the 3 typical sounds you may be victim of.
I find out a grinding noise when starting in reverse gear
If you listen to a grinding noise when you start in reverse with your skoda yeti, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to read this content for more information about strut mount noises on skoda yeti.
An increased reverse knocking noise on skoda yetiX
If you are subject to a knocking noise when you are in reverse with your skoda yeti and this noise tends to build up as you gain speed. It is plausible that you are dealing with a serious issue that needs to be fixed fairly quickly before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears very fast. Take your automobile to your auto mechanic quickly or read this content page about gearbox noise on skoda yeti for more information.
I listen to a noise when I go in reverse
Listening a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your skoda yeti reverse gear makes more noise than before, it is plausible that filings have been created and are moving around in it. It is therefore time to empty the box.
