It is never pleasing to acknowledge a sound on your vehicle that you don’t know where it comes from. You may be thinking about what to do when you notice a reversing gear noise that persists on your Volkswagen Touran 3? Any gearbox issue can be severe, but before making sure, it is better to do a few checks. Our team has made this paper to support you deal with it. First, we will see what the origins and the different gearbox noises can be on Volkswagen Touran 3, and second, what are the solutions available to you.
Classical reverse Volkswagen Touran 3 noises and some tips to maintain your gearbox
Why does the reversing of my Volkswagen Touran 3 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult exercise. The sound induced by the reversing of your Volkswagen Touran 3 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears chosen for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will put in on the gears will be enormous and you will produce a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely common if you perceive a reverse noise on your Volkswagen Touran 3 if you shift gear under these conditions.
Different Volkswagen Touran 3 reversing noises and their triggers
Finally in this section, we will move on to what you are probably most curious about in this article, to find out about the source of reversing noise on Volkswagen Touran 3. Here are the 3 typical noises you may be victim of.
I find out a grinding noise when starting in reverse gear
If you acknowledge a grinding noise when you start in reverse with your Volkswagen Touran 3, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to browse this content page for more information about strut mount noises on Volkswagen Touran 3.
An increased reverse knocking noise on Volkswagen Touran 3X
If you are subject to a knocking noise when you are in reverse with your Volkswagen Touran 3 and this noise tends to build up as you gain speed. It is conceivable that you are dealing with a serious issue that needs to be solved quickly before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears quickly. Take your vehicle to your mechanic quickly or read this content page about gearbox noise on Volkswagen Touran 3 for more details.
I listen to a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Volkswagen Touran 3 reverse gear makes more noise than before, it is conceivable that filings have been produced and are moving around in it. It is therefore time to empty the box.
