If you too have already experience a grinding noise on hyundai i40, you must have wondering the same questions as all hyundai i40 owners. We are rarely reassured when a grinding noise comes out on our automobile. As we are conscious of your doubts and questions, we have chosen to create this article in order to support you in and ease your investigation for a solution to your trouble. To do this, first we will see what the sources of a grinding noise on hyundai i40 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on hyundai i40 that originates from the shock absorbers and to finish from one of your doors.grinding-noise-hyundai-i40

I listen to a grinding noise on hyundai i40 when I turn the wheel

First, we will look into the grinding noises on hyundai i40 that occur every time you turn the wheel of your automobile. Here are the main explanations for this:

  • Hydraulic system

    • If you are subject to grinding noises on your hyundai i40 when you turn the wheels, it may be related to the hydraulic system of your automobile that allows you to run the entire power steering part. In such a case, the main point to examine is the power steering fluid level, which if below the normal level could be a signal of a leak of the device. In this case, keep in mind to redo the level and examine it frequently. If the trouble continues, go to your mechanic.

  • Bearings

    • “A grinding noise on hyundai i40 when I turn the wheels of my automobile” can also be a consequence of premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can produce sounds close to a grinding if they are worn. Keep in mind to examine their state.

  • Steering pump

    • Finally, a grinding noise on hyundai i40 when I turn may be linked to a tired steering pump power steering pump. The mission of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may appear between it and the belt. Think about to examine that it is working properly.

    If despite these different solutions you continue to hear a grinding noise on hyundai i40 when turning your steering wheel, we have created a complete content page on this subject that can help you find the origin.

    I notice a grinding noise on hyundai i40 when braking

    If you listen to a grinding noise from the brakes of your hyundai i40, it is highly imaginable that it will be linked with brake pads at the end of their life, actually, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but depending on your driving style and route, this may vary. Take off the wheels in question and examine the wear indicator on them. If they are dead they will have to be changed almost instantly because they will almost instantly damage your discs.
    If, despite crontrol, your grinding noise on hyundai i40 does come from your brakes but is not related to the pads, examine this content page to find out the other possible origins of brake noises on hyundai i40.

    I listen to a grinding noise on hyundai i40 at the shock absorbers

    If you are in the situation where you discover the grinding noise on hyundai i40 as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply when you change direction and the vehicle’s mass is swung from one side to the other. In cases like this, there are several explanations that can explain this noise. Indeed, you will have to examine some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to examine that there is no oil leaking from your shock absorbers.
    • You may experience abnormal wear and tear on one of the seals. This would cause an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on hyundai i40

    at each compression.
    Once you have inspected all these elements, you should have found the source of your issue, go to your technician to fix the faulty part. If you have not found the source of your trouble, we recommend that you take a look at this content page which discusses all possible origins of shock absorber noise on hyundai i40.

    I listen to a grinding noise on hyundai i40 at a door

    If that’s not enough, don’t hesitate to read this complete content page on door sounds on hyundai i40.
    It is possible, based on the kind of of noise you know, that the hinge of your door is at the origin of these noises. If this is the case, you will have to examine it by opening your door and checking out that the grinding noise on your hyundai i40 comes from a hinge that is too dry. To resolve this trouble, first try to grease the hinge, in most cases this is enough to solve your trouble. If that’s not enough, don’t hesitate to read this complete content page on door sounds on hyundai i40.