It is never enjoyable to notice a sound on your car that you don’t know where it comes from. You may be thinking about what to do when you find a reversing gear noise that remains on your hyundai i40? Any gearbox issue can be critical, but before making sure, it is better to do a few inspections. Our team has made this content page to help you fix it. First, we will see what the sources and the different gearbox noises can be on hyundai i40, and second, what are the solutions available to you.
Classical reverse hyundai i40 noises and some tips to look after your gearbox
Why does the reversing of my hyundai i40 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The sound generated by the reversing of your hyundai i40 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears chosen for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the car in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the car is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. In fact, the pressure you will exert on the gears will be significant and you will make a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely usual if you perceive a reverse noise on your hyundai i40 if you shift gear under these conditions.
Several hyundai i40 reversing noises and their origins
Finally in this section, we will move on to what you are probably most curious about in this content, to find out about the source of reversing noise on hyundai i40. Here are the 3 typical sounds you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you notice a grinding noise when you start in reverse with your hyundai i40, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to browse this content page for more information about strut mount noises on hyundai i40.
An increased reverse knocking noise on hyundai i40X
If you are subject to a knocking noise when you are in reverse with your hyundai i40 and this noise tends to amplify as you gain speed. It is plausible that you are confronting a serious issue that needs to be fixed right away before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears in short order. Take your car to your mechanic quickly or check out this article about gearbox noise on hyundai i40 for more information.
I listen to a noise when I go in reverse
Listening a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your hyundai i40 reverse gear makes more noise than before, it is plausible that filings have been produced and are moving around in it. It is therefore time to empty the box.
