Frequently hearing noises from your automobile is never pleasant, so hearing wiper sounds on your Ford Explorer can be disturbing. This warning sign may be a symptom of a small trouble as well as a warning of a small fix to come. Whatever the case, it is important to locate the source and take the necessary actions to resolve the trouble, it is with this in mind that we wanted to write this article to help you see more clearly. We will first look at the conceivable causes and solutions for dealing with noise from your wipers on your Ford Explorer. Then, in a second step, we will give you some recommendations to prevent this type of noise from occurring again.
Wiper blades that generates a squeaking or rubbing noise on Ford Explorer
A wiper noise on your Ford Explorer, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasant and can distract your concentration while you are driving. It is important to eliminate such a noise. In addition, a wiper blade noise is usually the sign of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Explanations and solutions for wiper noise on your Ford Explorer
- Check the wear of your wiper blades. This is the most basic trigger of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Consider swapping them in both situations.
- Dirty windshield, examine the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may listen a wiper noise on your Ford Explorer, it is up to you to clean it with your windshield washer fluid if sufficient, otherwise use sodium bicarbonate to clean it, it is very practical.
- Check that your wiper blades are well situated. In fact, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can examine these two points.
- Check the tightness of the wiper arm device and that the friction between the windshield and the wipers is not too high. In fact, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Ford Explorer comes out.
Some typical tips to limit wiper blades noise on your Ford Explorer
Finally, we will give you some suggestions and warnings to help you expand the life of your wipers and prevent unwanted noise they may trigger during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. In fact, the purpose of the dishwashing liquid is not to wash windows, additionally if you wanted to use it for this goal, you would have to rinse abundantly because it creates a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore encounter an increase in the noise of these.
- Do not wax your windshield, the film that the wax will develop may prevent you from seeing the road properly. In fact, this oily film will create a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main cause for the noise produced by your windshield wipers, we advise you not to drive in puddles after storms or heavy rain. In fact, the puddles will inevitably be full of dirt that will end up on your windshield and trigger noise or deteriorate to your windshield wipers.
