Constantly hearing noises from your automobile is never pleasurable, so hearing wiper sounds on your Dodge Nitro can be troubling. This sign may be a sign of a slight trouble as well as a warning of a slight service to come. In any case, it is necessary to find the origin and take the necessary actions to correct the trouble, it is with this in mind that we decided to produce this content to support you see more clearly. We will first look into the conceivable causes and solutions for dealing with noise from your wipers on your Dodge Nitro. Then, in a second step, we will give you some hints and tips to prevent this type of noise from happening again.
Wiper blades that makes a squeaking or rubbing noise on Dodge Nitro
A wiper noise on your Dodge Nitro, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasurable and can distract your focus while you are driving. It is fundamental to stop such a sound. Also, a wiper blade noise is usually the indicator of a future malfunction of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Causes and solutions for wiper noise on your Dodge Nitro
- Verify the wear of your wiper blades. This is the most common cause of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Think about replacing them in both situations.
- Dirty windshield, verify the level of your windshield washer fluid. One of the triggers of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may get a wiper noise on your Dodge Nitro, it is up to you to clean it with your windshield washer fluid if appropriate, otherwise use sodium bicarbonate to clean it, it is very practical.
- Verify that your wiper blades are well situated. Indeed, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can verify these two points.
- Verify the tightness of the wiper arm device and that the friction between the windshield and the wipers is not too high. Indeed, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Dodge Nitro shows up.
Some universal tips to limit wiper blades noise on your Dodge Nitro
To finish , we will give you some recommendations and warnings to help you extend the life of your wipers and avoid unwanted noise they may trigger during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. Indeed, the purpose of the dishwashing liquid is not to wash windows, also if you wanted to use it for this reason, you would have to rinse abundantly because it triggers a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore encounter an increase in the noise of these.
- Do not wax your windshield, the film that the wax will develop may prevent you from seeing the road properly. Indeed, this oily film will develop a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main reason for the noise created by your windshield wipers, we recommend you not to drive in puddles after storms or heavy rain. Indeed, the puddles will inevitably be full of dirt that will end up on your windshield and cause noise or deteriorate to your windshield wipers.
