Repeatedly hearing noises from your car is never pleasurable, so hearing wiper sounds on your Chrysler Sebring can be disturbing. This warning sign may be an indication of a slight problem as well as a warning of a slight repair to come. No matter the reason, it is useful to check the origin and take the necessary actions to solve the problem, it is with this in mind that we wanted to compose this content page to help you see more clearly. We will first take a look at the conceivable causes and solutions for dealing with noise from your wipers on your Chrysler Sebring. Then, in a second step, we will give you some hints and tips to prevent this type of noise from happening again.
Wiper blades that causes a squeaking or rubbing noise on Chrysler Sebring
A wiper noise on your Chrysler Sebring, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasurable and can distract your focus while you are driving. It is important to fix such a sound. Moreover, a wiper blade noise is in most cases the signal of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Reasons and solutions for wiper noise on your Chrysler Sebring
- Check the wear of your wiper blades. This is the most regular cause of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Think about replacing them in both situations.
- Dirty windshield, check the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may acknowledge a wiper noise on your Chrysler Sebring, it is up to you to clean it with your windshield washer fluid if sufficient, otherwise use sodium bicarbonate to clean it, it is very practical.
- Check that your wiper blades are well situated. In fact, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can check these two points.
- Check the tightness of the wiper arm system and that the friction between the windshield and the wipers is not too high. In fact, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Chrysler Sebring appears.
Some basic suggestions to limit wiper blades noise on your Chrysler Sebring
Finally, we will give you some recommendations and warnings to help you expand the life of your wipers and avoid unwanted noise they may create during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. In fact, the purpose of the dishwashing liquid is not to wash windows, additionally if you wanted to use it for this objective, you would have to rinse abundantly because it makes a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore experience an increase in the noise of these.
- Do not wax your windshield, the film that the wax will create may prevent you from seeing the road properly. In fact, this oily film will build a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main cause for the noise generated by your windshield wipers, we recommend you not to drive in puddles after storms or heavy rain. In fact, the puddles will inevitably be full of dirt that will end up on your windshield and cause noise or deteriorate to your windshield wipers.
