Repeatedly finding out noises from your vehicle is never pleasant, so finding out wiper sounds on your Acura TSX can be troubling. This indicator may be a sign of a moderate issue as well as a warning of a moderate service to come. In any case, it is imperative to find the source and take the necessary actions to resolve the issue, it is with this in mind that we decided to compose this content page to help you see more clearly. We will first take a look at the plausible reasons and solutions for dealing with noise from your wipers on your Acura TSX. Then, in a second step, we will give you some hints and tips to prevent this type of noise from happening again.
Wiper blades that generates a squeaking or rubbing noise on Acura TSX
A wiper noise on your Acura TSX, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasant and can distract your attention while you are driving. It is imperative to eliminate such a noise. In addition, a wiper blade noise is usually the indication of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Causes and solutions for wiper noise on your Acura TSX
- Examine the wear of your wiper blades. This is the most general trigger of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Reflect on replacing them in both situations.
- Dirty windshield, check the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may perceive a wiper noise on your Acura TSX, it is up to you to clean it with your windshield washer fluid if suitable, otherwise use sodium bicarbonate to clean it, it is very effective.
- Examine that your wiper blades are well positioned. Indeed, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can check these two points.
- Examine the tightness of the wiper arm mechanism and that the friction between the windshield and the wipers is not too high. Indeed, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Acura TSX shows up.
Some basic recommendations to limit wiper blades noise on your Acura TSX
To finish , we will give you some suggestions and warnings to help you expand the life of your wipers and avoid unwanted noise they may provoke during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. Indeed, the purpose of the dishwashing liquid is not to wash windows, moreover if you wanted to use it for this goal, you would have to rinse abundantly because it causes a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore experience an increase in the noise of these.
- Do not wax your windshield, the film that the wax will build may prevent you from seeing the road properly. Indeed, this oily film will make a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main explanation for the noise produced by your windshield wipers, we suggest you not to drive in puddles after storms or heavy rain. Indeed, the puddles will inevitably be full of dirt that will end up on your windshield and trigger noise or destroy to your windshield wipers.
