Frequently hearing noises from your vehicle is never pleasurable, so hearing wiper sounds on your Acura TL can be distressing. This manifestation may be a sign of a slight trouble as well as a warning of a slight repair to come. No matter the reason, it is useful to check the origin and take the necessary actions to correct the trouble, it is with this in mind that we wanted to compose this article to help you see more clearly. We will first look into the plausible causes and solutions for dealing with noise from your wipers on your Acura TL. Then, in a second step, we will give you some suggestions to prevent this type of noise from going on again.
Wiper blades that makes a squeaking or rubbing noise on Acura TL
A wiper noise on your Acura TL, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasurable and can distract your attention while you are driving. It is essential to stop such a sound. Also, a wiper blade noise is usually the indication of a future malfunction of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Reasons and solutions for wiper noise on your Acura TL
- Check the wear of your wiper blades. This is the most general cause of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Reflect on swapping them in both cases.
- Dirty windshield, examine the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may listen a wiper noise on your Acura TL, it is up to you to clean it with your windshield washer fluid if sufficient, otherwise use sodium bicarbonate to clean it, it is very effective.
- Check that your wiper blades are well placed. Indeed, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can examine these two points.
- Check the tightness of the wiper arm mechanism and that the friction between the windshield and the wipers is not too high. Indeed, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Acura TL happens.
Some basic suggestions to limit wiper blades noise on your Acura TL
Finally, we will give you some recommendations and warnings to help you expand the life of your wipers and avoid unwanted noise they may provoke during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. Indeed, the purpose of the dishwashing liquid is not to wash windows, furthermore if you wanted to use it for this objective, you would have to rinse abundantly because it creates a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore experience an increase in the noise of these.
- Do not wax your windshield, the film that the wax will develop may prevent you from seeing the road properly. Indeed, this oily film will develop a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main cause for the noise generated by your windshield wipers, we encourage you not to drive in puddles after storms or heavy rain. Indeed, the puddles will inevitably be full of dirt that will end up on your windshield and cause noise or destroy to your windshield wipers.
