It is never pleasant to listen to new sounds on your car. We always tend to worry and think about the most severe. But hearing wheel noise on Ram P/U is very often connected to small problems that you can easily eliminate. To assist you in this investigation, our team decided to write this article to make your life easier and help you in this process. To do this, we will alternately see what are the different noises that Ram P/U wheels can cause and to which failures they are linked.
The different wheel noises on Ram P/U and their origins
We will therefore look at the different types of sound you may feel and their causes.
I acknowledge grinding wheel noise on Ram P/U from, cardan shaft
The first possibility of grinding wheel noise on your Ram P/U is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also conceivable that you may feel this sound when you drive over speed bumps. You should notice a noise close to a cracking . It is quite conceivable in this circumstance that one or more bellows of your gimbals are out of date. In this situation, the joint must be injured and the transmission may fail. Check the condition of the joint bellows and swap them if required or risk having your car immobilized. If they have holes, they will quickly dry out and fill with dust or stones that will rather quickly damage the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not the reason of it, browse this guide about suspension noise on Ram P/U to help you find a solution.
I hear a wheel noise Ram P/U when coasting due to a bearing
One of the other potential origins of signs on the front wheel of your Ram P/U when coasting, may be that one of your bearing is good to be replaced, it will tend to make a thumping sound that intensifies when it is stressed (turns faster and faster). So don’t forget to check by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well located here, if this is the case swap it or them before long. If, on the other hand, this noise only shows up itself with an engaged speed, browse this guide about loud noises on Ram P/U, you will most likely find a resolution to your problem.
I listen to a wheel noise Ram P/U due to brakes
If you encounter noise from one or both of your wheels, it is highly conceivable that it is your pads or discs that are the reason. Indeed, a disc or a set of dead plates will create a loud metallic sound that you will inevitably notice. To check this, put your car on axle stands, and examine the condition of your discs and pads by taking off the wheel. If they are involved, swap them quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your Ram P/U, but the brakes are not the cause, read this guide for more details on this problem.
I experience a wheel noise Ram P/U caused by faulty wheel alingment
If you feel a sound that may resemble a vibration and will accentuate as you increase speed, it is conceivable that your wheel alingment or balancing is involved. Wheel alingment of a car is a major step that is generally done after each tire change. It will ensure that the wheel rotates in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and cause a significant wheel noise on Ram P/U. Examine that your seals are still in place, otherwise go to your garage.
I perceive a wheel noise Ram P/U due to wishbone
Finally, you may have a noise on your Ram P/U at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the cause of this problem comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone during the acceleration phases when it will be pushed on side and the automobile will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also check the condition of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your auto mechanic.
