It is never pleasing to find out new sounds on your car. We usually will get worried and think about the worst. But experiencing wheel noise on Nissan Altima is very often linked to small issue that you can easily eliminate. To assist you in this examination, our team decided to create this article to make your life easier and support you in this challenge. To do this, we will alternately see what are the different noises that Nissan Altima wheels can provoke and to which malfunctions they are associated.
The different wheel noises on Nissan Altima and their origins
We will therefore concentrate on the different types of noise you may experience and their origins.
I perceive grinding wheel noise on Nissan Altima from, cardan shaft
The first possibility of grinding wheel noise on your Nissan Altima is that you feel a gimbal noise when you are turning significantly, usually at low speed. It is also plausible that you may experience this noise when you drive over speed bumps. You should feel a noise close to a cracking . It is quite plausible in this circumstance that one or more bellows of your gimbals are out of date. In this case, the joint must be destroyed and the transmission may fail. Check the state of the joint bellows and change them if required or risk having your car immobilized. If they have cracks, they will very fast dry out and fill with dust or stones that will rather quickly affect the cardan shaft itself, don’t wait to act! In case you have a noise when you pass on damaged roads but the gimbals are not the cause, read this guide about suspension noise on Nissan Altima to support you find a solution.
I acknowledge a wheel noise Nissan Altima when coasting caused by a bearing
One of the other potential origins of signs on the front wheel of your Nissan Altima when coasting, may be that one of your bearing is good to be swapped, it will tend to generate a thumping noise that intensifies when it is stressed (turns faster and faster). So you should check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case change it or them quickly. If, on the other hand, this noise only shows up itself with an engaged speed, read this guide about loud noises on Nissan Altima, you will most likely find a resolution to your issue.
I notice a wheel noise Nissan Altima caused by brakes
If you listen to noise from one or both of your wheels, it is highly plausible that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will create a loud metallic noise that you will obviously feel. To check this, put your car on axle stands, and check the state of your discs and pads by getting rid of the wheel. If they are involved, change them as soon as possible , otherwise you will no longer be able to brake. If you experience a metallic noise from your Nissan Altima, but the brakes are not the cause, read this guide for more details on this issue.
I experience a wheel noise Nissan Altima linked to faulty wheel alingment
If you experience a noise that may look like a vibration and will accentuate as you increase speed, it is plausible that your wheel alingment or balancing is involved. Wheel alingment of a car is an important step that is generally done after each tire change. It will ensure that the wheel rotates in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and provoke a significant wheel noise on Nissan Altima. Check that your seals are still in place, otherwise go to your mechanic.
I perceive a wheel noise Nissan Altima connected to wishbone
Finally, you may experience a noise on your Nissan Altima at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the cause of this issue comes from the double wishbone suspension or the direction hinges. In fact, you will be able to test a damaged double suspension wishbone when you are accelerating when it will be pushed on side and the automobile will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also check the state of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your mechanic.
