It is never pleasing to find out new sounds on your automobile. We always might get worried and think about the worst. But experiencing wheel noise on Mitsubishi Eclipse is very often connected to small problems that you can easily eliminate. To support you in this inspection, our team decided to create this content to make your life easier and support you in this process. To do this, we will alternately see what are the different noises that Mitsubishi Eclipse wheels can create and to which malfunctions they are linked.
The different wheel noises on Mitsubishi Eclipse and their origins
We will therefore look at the different types of sound you may experience and their origins.
I acknowledge grinding wheel noise on Mitsubishi Eclipse from, cardan shaft
The first possibility of grinding wheel noise on your Mitsubishi Eclipse is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also possible that you may experience this sound when you drive over speed bumps. You should hear a noise close to a cracking . It is quite possible in this case that one or more bellows of your gimbals are out of date. In this case, the joint must be destroyed and the transmission may fail. Check the state of the joint bellows and swap them if needed or risk having your automobile immobilized. If they have holes, they will rather quickly dry out and fill with dust or stones that will rather quickly affect the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not the cause, read this guide about suspension noise on Mitsubishi Eclipse to support you find a solution.
I get a wheel noise Mitsubishi Eclipse when coasting attributable to a bearing
One of the other probable causes of signs on the front wheel of your Mitsubishi Eclipse when coasting, may be that one of your bearing is good to be swapped, it will tend to make a thumping sound that intensifies when it is stressed (turns faster and faster). So don’t forget to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well located here, if this is the case swap it or them in the near future. If, on the other hand, this noise only shows up itself with an engaged speed, read this guide about loud noises on Mitsubishi Eclipse, you will most likely find a resolution to your trouble.
I notice a wheel noise Mitsubishi Eclipse attributable to brakes
If you encounter noise from one or both of your wheels, it is highly possible that it is your pads or discs that are the cause. Indeed, a disc or a set of dead plates will make a loud metallic sound that you will inevitably feel. To verify this, put your automobile on axle stands, and examine the state of your discs and pads by taking out the wheel. If they are involved, swap them promptly , otherwise you will no longer be able to brake. If you experience a metallic noise from your Mitsubishi Eclipse, but the brakes are not the cause, read this guide for more information on this trouble.
I notice a wheel noise Mitsubishi Eclipse connected to faulty wheel alingment
If you experience a sound that may be like a vibration and will accentuate as you increase speed, it is possible that your wheel alingment or balancing is the origin of it. Wheel alingment of a automobile is an important step that is generally done after each tire change. It will ensure that the wheel rotates in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and create a significant wheel noise on Mitsubishi Eclipse. Check that your seals are still set up, otherwise go to your garage.
I notice a wheel noise Mitsubishi Eclipse linked to wishbone
Finally, you may notice a noise on your Mitsubishi Eclipse at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the reason of this trouble comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone when you are accelerating when it will be pushed on side and the vehicle will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also verify the state of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your repair shop.
