It is never enjoyable to find out new sounds on your vehicle. We generally might worry and think about the most extreme. But hearing wheel noise on Hyundai Kona is very often connected to small problems that you can easily solve. To assist you in this examination, our team decided to create this paper to make your life easier and support you in this process. To do this, we will alternately see what are the different noises that Hyundai Kona wheels can create and to which malfunctions they are associated.
The diverse wheel noises on Hyundai Kona and their origins
We will therefore look at the different types of noise you may experience and their triggers.
I acknowledge grinding wheel noise on Hyundai Kona from, cardan shaft
The first possibility of grinding wheel noise on your Hyundai Kona is that you feel a gimbal noise when you are turning significantly, usually at low speed. It is also plausible that you may experience this noise when you drive over speed bumps. You should feel a noise close to a cracking . It is quite plausible in this situation that one or more bellows of your gimbals are out of date. In this situation, the joint must be weakened and the transmission may fail. Check the state of the joint bellows and replace them if necessary or risk having your vehicle immobilized. If they have holes, they will in the near future dry out and fill with dust or stones that will rather quickly harm the cardan shaft itself, don’t wait to act! In case you have a noise when you pass on damaged roads but the gimbals are not the reason of it, read this article about suspension noise on Hyundai Kona to support you find a solution.
I listen to a wheel noise Hyundai Kona when coasting caused by a bearing
One of the other probable triggers of signs on the front wheel of your Hyundai Kona when coasting, may be that one of your bearing is tired, it will tend to produce a thumping noise that intensifies when it is stressed (turns faster and faster). So be sure you examine by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them in short order. If, on the other hand, this noise only manifests itself with an engaged speed, read this article about loud noises on Hyundai Kona, you will most likely find a resolution to your problem.
I notice a wheel noise Hyundai Kona caused by brakes
If you listen to noise from one or both of your wheels, it is highly plausible that it is your pads or discs that are the trigger. Indeed, a disc or a set of dead plates will create a loud metallic noise that you will obviously feel. To examine this, put your vehicle on axle stands, and check the state of your discs and pads by taking out the wheel. If they are involved, replace them fairly quickly , otherwise you will no longer be able to brake. If you experience a metallic noise from your Hyundai Kona, but the brakes are not the cause, browse this article for more information on this problem.
I perceive a wheel noise Hyundai Kona caused by faulty wheel alingment
If you experience a noise that may resemble a vibration and will increase as you increase speed, it is plausible that your wheel alingment or balancing is the cause of it. Wheel alingment of a vehicle is a major step that is generally done after each tire change. It will ensure that the wheel rotates in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and create a significant wheel noise on Hyundai Kona. Verify that your seals are still in place, otherwise go to your mechanic.
I perceive a wheel noise Hyundai Kona connected to wishbone
Finally, you may experience a noise on your Hyundai Kona at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the trigger of this problem comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone while accelerating when it will be pushed on side and the automobile will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also examine the state of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your auto technician.
