Do you hear a metallic noise on your Hyundai Kona every time you drive? We can understand that this is not pleasant and that you are wandering. Listening such a noise is not always a good indication, but it may also be nothing major. To support you remedy this trouble, our team has decided to produce this article to help you in this research. In order to carry out this research as efficiently as possible, we will first have a look at the conceivable sources of metallic noise in the front of your car, and then, if the metallic noise comes from the rear of your car.
Metal noise Hyundai Kona coming from the front end of the car
I perceive a metal rattling noise coming from wheels
- Metallic noise coming from your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the probable triggers of metal noise manifestations on your Hyundai Kona, may be that one of your bearing is tired, it will commonly generate a loud noise that increase when stressed (turns faster and faster). So take into account to examine by taking speed (neutral gear and window open to be aware only to noise of the wheels) that the noise is well based here, if this is the case swap it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this report on loud noise on Hyundai Kona, you will most likely find a remedy to your trouble.
If you encounter a metalic noise on Hyundai Kona and you have the feeling that it comes from your front wheels, it is highly conceivable that it is your pads or discs that are the trigger. In fact, a disc or a set of dead plates will generate a strong metallic rubbing noise that you will inevitably feel. To examine this, put your car on safety stand, and examine the condition of your discs and pads by taking away the wheel. If they are involved, swap them promptly , otherwise you will no longer be able to brake. If you experience a metallic noise from your car, and you want informations about it, examine this guide for more details about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you perceive a metallic noise on your Hyundai Kona, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will induce a metallic snap when they hit or change direction. To examine this, put yourself under your car, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be changed. If this is your case, we would suggest that you browse this article for a complete guide about steering noises on Hyundai Kona.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are weakened, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Hyundai Kona. Once screwed up, they will no longer fulfill their purpose as shock absorbers and, with each impact, or violent acceleration, a noise will arise. Therefore, keep in mind to examine their status and swap them if required. Feel free to read this article which is a complete file about strut mounts noises on Hyundai Kona, how to examine their condition and change them.
Finally, the last typical trigger of metallic noise on Hyundai Kona. It’s because your transmission system is the source. It is possible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then develop a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we would suggest that you read this detailed guide on the sources of steering noises on Hyundai Kona.
Metallic noise Hyundai Kona coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you hear an exhaust noise that is more of a metallic type, it is conceivable that one or more parts of your exhaust may be damaged. In fact, it is conceivable that either the catalyst or the silencer may be the trigger of this noise. To be sure, go under the car, cold, and knock each of the previously stated units with a hammer to define the source of the noise. You should acknowledge things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to reflect on changing it, as well as the silencer. In this case, to stop the metallic noise on your Hyundai Kona, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your car, it is conceivable that with wear they are at the origin of your metallic noises on your Hyundai Kona. Go a little further up in the content where you will find information of the solution already exposed for the front part of the car.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
