It is never relaxing to acknowledge new noises on your automobile. We always tend to worry and think about the most severe. But hearing wheel noise on Ford Taurus is very often linked to small issue that you can easily resolve. To support you in this investigation, our team decided to write this content page to make your life easier and help you in this process. To do this, we will alternately see what are the distinctive noises that Ford Taurus wheels can cause and to which malfunctions they are associated.
The different wheel noises on Ford Taurus and their origins
We will therefore focus on the different types of sound you may experience and their origins.
I perceive grinding wheel noise on Ford Taurus from, cardan shaft
The first possibility of grinding wheel noise on your Ford Taurus is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also possible that you may experience this sound when you drive over speed bumps. You should hear a noise close to a cracking . It is quite possible in this circumstance that one or more bellows of your gimbals are out of date. In this case, the joint must be weakened and the transmission may fail. Check the condition of the joint bellows and replace them if needed or risk having your automobile immobilized. If they have cracks, they will in the near future dry out and fill with dust or stones that will promptly affect the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not the origin of it, browse this guide about suspension noise on Ford Taurus to help you find a solution.
I get a wheel noise Ford Taurus when coasting attributable to a bearing
One of the other possible triggers of signs on the front wheel of your Ford Taurus when coasting, may be that one of your bearing is good to be swapped, it will tend to generate a thumping sound that intensifies when it is stressed (turns faster and faster). So you should examine by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well located here, if this is the case replace it or them in short order. If, on the other hand, this noise only shows up itself with an engaged speed, browse this guide about loud noises on Ford Taurus, you will most likely find an answer to your issue.
I find out a wheel noise Ford Taurus attributable to brakes
If you encounter noise from one or both of your wheels, it is highly possible that it is your pads or discs that are the cause. In fact, a disc or a set of dead plates will make a loud metallic sound that you will undoubtedly notice. To examine this, put your automobile on axle stands, and check the condition of your discs and pads by taking off the wheel. If they are involved, replace them quickly , otherwise you will no longer be able to brake. If you experience a metallic noise from your Ford Taurus, but the brakes are not the cause, read this guide for more details on this issue.
I notice a wheel noise Ford Taurus linked to faulty wheel alingment
If you experience a sound that may be like a vibration and will increase as you increase speed, it is possible that your wheel alingment or balancing is the cause of it. Wheel alingment of a automobile is a fundamental step that is generally done after each tire swap. It will ensure that the wheel rotates in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and cause a significant wheel noise on Ford Taurus. Verify that your seals are still set up, otherwise go to your mechanic.
I perceive a wheel noise Ford Taurus caused by wishbone
Finally, you may feel a noise on your Ford Taurus at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the cause of this issue comes from the double wishbone suspension or the direction hinges. In fact, you will be able to test a damaged double suspension wishbone when you are accelerating when it will be pushed on side and the car will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also examine the condition of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your repair shop.
