Do you hear a metallic noise on your Ford Taurus every time you drive? We know that this is not enjoyable and that you have questions. Finding out such a noise is not always a good indicator, but it may also be nothing serious. To help you remedy this problem, our redaction decided to write this content to help you in this investigation. In order to conduct this research as efficiently as possible, we will first have a look at the plausible origins of metallic noise in the front of your car, and then, if the metallic noise comes from the rear of your car.
Metal noise Ford Taurus coming from the front end of the car
I perceive a metal rattling noise coming from wheels
- Metallic noise based on your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the possible triggers of metal noise symptoms on your Ford Taurus, may be that one of your bearing is tired, it will frequently generate a loud noise that increases when stressed (turns faster and faster). So think about to check by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well established here, if this is the case change it or them promptly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this article on loud noise on Ford Taurus, you will most likely find a remedy to your problem.
If you discern a metalic noise on Ford Taurus and you have the feeling that it comes from your front wheels, it is highly plausible that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will generate a strong metallic friction noise that you will inevitably feel. To check this, put your car on safety stand, and check the state of your discs and pads by taking out the wheel. If they are involved, change them promptly , otherwise you will no longer be able to brake. If you experience a metallic noise from your car, and you want explications about it, browse this guide for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you perceive a metallic noise on your Ford Taurus, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will cause a metallic snap when they hit or change direction. To check this, put yourself under your car, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be replaced. If this is your case, we recommend highly that you have a look at this content for a complete guide about steering noises on Ford Taurus.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are weakened, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Ford Taurus. Once screwed up, they will no longer fulfill their task as shock absorbers and, with each impact, or violent acceleration, a noise will appear. Therefore, think about to check their status and change them if required. Feel free to consult this content which is a complete file about strut mounts noises on Ford Taurus, how to check their state and change them.
Finally, the last common reason of metallic noise on Ford Taurus. It’s because your transmission system is the origin. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then develop a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we recommend highly that you browse this detailed guide on the sources of steering noises on Ford Taurus.
Metallic noise Ford Taurus coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you discern an exhaust noise that is more of a metallic type, it is plausible that one or more parts of your exhaust may be damaged. In fact, it is plausible that either the catalyst or the silencer may be the reason of this noise. To be sure, go under the car, cold, and knock each of the previously stated components with a hammer to find the origin of the noise. You should hear things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be necessary to reflect on changing it, as well as the silencer. In cases like this, to stop the metallic noise on your Ford Taurus, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your car, it is plausible that with wear they are at the origin of your metallic noises on your Ford Taurus. Go a little further up in the content page where you will find details of the solution already exposed for the front part of the car.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
