It is never agreeable to listen to new sounds on your car. We generally will be anxious and think about the most extreme. But finding out wheel noise on Audi Q2 is very often related to small trouble that you can easily resolve. To support you in this investigation, our team decided to write this article to make your life easier and support you in this task. To do this, we will alternately see what are the distinctive noises that Audi Q2 wheels can create and to which failures they are associated.
The diverse wheel noises on Audi Q2 and their origins
We will therefore concentrate on the different types of noise you may experience and their sources.
I perceive grinding wheel noise on Audi Q2 from, cardan shaft
The first situation of grinding wheel noise on your Audi Q2 is that you feel a gimbal noise when you are turning significantly, usually at low speed. It is also possible that you may experience this noise when you pass over speed bumps. You should notice a noise close to a cracking . It is quite possible in this case that one or more bellows of your gimbals are out of date. In this case, the joint must be injured and the transmission may fail. Check the shape of the joint bellows and swap them if necessary or risk having your car immobilized. If they have cracks, they will promptly dry out and fill with dust or stones that will rather quickly damage the cardan shaft itself, don’t wait to act! In case you have a noise when you pass on damaged roads but the gimbals are not the reason of it, read this article about suspension noise on Audi Q2 to support you find a solution.
I acknowledge a wheel noise Audi Q2 when coasting linked to a bearing
One of the other probable origins of symptoms on the front wheel of your Audi Q2 when coasting, may be that one of your bearing is good to be replaced, it will tend to produce a thumping noise that intensifies when it is stressed (turns faster and faster). So be sure to check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them before long. If, on the other hand, this noise only shows up itself with an engaged speed, read this article about loud noises on Audi Q2, you will most likely find a solution to your issue.
I acknowledge a wheel noise Audi Q2 linked to brakes
If you encounter noise from one or both of your wheels, it is highly possible that it is your pads or discs that are the trigger. Indeed, a disc or a set of dead plates will create a loud metallic noise that you will surely notice. To check this, put your car on axle stands, and control the shape of your discs and pads by extracting the wheel. If they are involved, swap them in short order , otherwise you will no longer be able to brake. If you experience a metallic noise from your Audi Q2, but the brakes are not the cause, read this article for more information on this issue.
I experience a wheel noise Audi Q2 connected to faulty wheel alingment
If you experience a noise that may look like a vibration and will increase as you increase speed, it is possible that your wheel alingment or balancing is involved. Wheel alingment of a car is an important step that is generally done after each tire swap. It will ensure that the wheel moves in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and create a significant wheel noise on Audi Q2. Verify that your seals are still in place, otherwise go to your mechanic.
I notice a wheel noise Audi Q2 linked to wishbone
Finally, you may notice a noise on your Audi Q2 at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the cause of this issue comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone while accelerating when it will be pushed on side and the automobile will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also check the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your auto technician.
