When you observe uncommon noises on your Fiat Panda 2 you tend to worry about them. Especially when you find a water noise on Fiat Panda 2. It is right away assimilated to a issue that will cause the vehicle to take on water. As we know that you do not take these problems lightly, we have chosen to write this paper to help you find the triggers and get rid of this concern as soon as possible. To do this, first, what types of water noise can you perceive in the cabin on Fiat Panda 2, then what is the source of a water noise on Fiat Panda 2 when you turn, and finally what does a water sound mean when you start.
I notice a water noise on Fiat Panda 2 in the cabin
I perceive a water noise on Fiat Panda 2 from ventilation
If you perceive a water noise on your Fiat Panda 2 when you turn on the ventilation, it is more than likely that you have an inlet the evacuation openings of your windshield that are blocked . To check this, you need to remove your windshield wipers, and take off the protective grids that are located just below your windshield. You will most likely find accumulated leaves, mud or other material that will clog the evacuations and cause water to stagnate in this place. Remove them or risk infiltration into the cabin of your Fiat Panda 2. If you knowledge other cabin noise in your Fiat Panda 2, don’t hesitate to check that content which will give you answers about your problems.
I notice a water noise on Fiat Panda 2 when I turn
If you feel water moving noise as you turn, it is likely that you have the same concern as seen above. Indeed, whether this water noise on Fiat Panda 2 comes from your ventilation or you perceive it when you turn, typically the trigger is the same, namely, obstructed windshield water drain openings. If your water noise on Fiat Panda 2 comes from your doors, it may be the same concern but with the evacuations of your doors, take a look at that side. So do the same technique as for water noise in the ventilation system to get rid of it. If you do not have the skills or tools, get in touch with your auto mechanic who can resolve this problem very quickly. If you are experiencing noise when you turn on your Fiat Panda 2 but after checking it’s not water noises, check that content page to get solutions to resolve it.
I perceive a water noise on Fiat Panda 2 when I turn on my engine
Finally, if you encounter a water noise when you turn on the engine of your Fiat Panda 2, it is plausible that this indicator is more important than it sounds. Indeed, there are two main reasons for this concern. First of all, it is your cooling system that pressurizes and you will perceive a “dripping” sound of water that is regular. On the other hand, if this is not the case, it is more uncommon, but it may be a leak of your cylinder head gasket that is involved. Keep in mind to examine the state of the cooling system, so that you do not have any “mayonnaise” in your cooling system that would indicate the leakage of the system, which is the result of the oil/water mixture. If this is the case, go to your mechanic to avoid engine failure.