In some cases your automobile can make noises in the front axle, you are very certainly not reassured by this types of noise and you instantly tend to presume that you will lose a wheel or that the repair will cost you an huge sum. Thus, what if you discern a noise coming from the front end of your Toyota 4Runner? It may not be much and you can repair the problem yourself, but if in doubt it is better to verify before a larger damage shows up. It is with this in mind that we have decided to produce this document and allow you to find out the problem and find a treatment. We will, through few steps review all the elements that can create noises at the front end of your Toyota 4Runner. 
What are the elements that can cause front axle noise Toyota 4Runner?
Most of our article will focus on finding the element that gives your Toyota 4Runner front wheel noise. The following is a list of the components that are most likely to be causing it and how to verify it.
Noise vibration front end Toyota 4Runner : the shock absorber cup
One of the most likely causes of symptoms on your Toyota 4Runner front axle noise is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To verify if this is the problem that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, consider changing them quickly as this may damage other parts and require more expensive repairs.
Noise while turning front end Toyota 4Runner : stabilizer bar
If you find out of a noise on your Toyota 4Runner at the level of the front end when you are turning flat or going up on sidewalks for example, it is most likely related to one of the parts of your stabilizer bar that is defective. To verify the origin of the problem, you may feel a lack of balance in the direction of the automobile (it pulls to the left or it pulls to the right). Additionally, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are out of date. In this case, go to your garage.
Front axle noise when turning Toyota 4Runner : direction triangles
Finally, you may have a noise in the front wheel on your Toyota 4Runner, when you accelerate, brake or in a rather random but regular way. It is likely that the cause of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also verify the condition of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your auto technician.
Loud noise front end Toyota 4Runner : bearings
One of the other likely origins of symptoms of the front axle of your Toyota 4Runner, may be that one of your rollings is tired, it will tend to make a thumping noise that intensifies when it is under stress (turns faster and faster). So make sure you verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them quickly. If, on the other hand, this noise only appears with an engaged speed, consult our article on loud noise on Toyota 4Runner, you will probably find an answer to your problem.
Front end noise squeaking Toyota 4Runner : cardan shaft
One of the most common causes when noise appears on the front axle of your Toyota 4Runner when you turn with your automobile is related to the direction of your automobile. In fact, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Toyota 4Runner, do not hesitate to consult this article to find the solution to your problem.
