It is never pleasant to notice a sound on your vehicle you don’t where it comes from. So what if you detect a timing belt noise that remains on your Renault Megane 2? It is highly conceivable that this is a moderate problem, but before making sure, it is better to perform some tests. If this belt noise comes from your timing belt, our team has written this article content to support you locate and fix it. First, we will take a look at the timing belt noises on your Renault Megane 2 and then we will look at the reasons for these noises.
Noise of timing belt Renault Megane 2
The timing belt has a very important role to play. It will act as a conductor and synchronizes the engine crankshaft to the camshaft. It provides the correct transmission of movement to the valves and pistons, which must open at specific times. It is the link between the top and bottom of the engine. It is sorely tested and wears out over time, it is up to you to respect the manufacturer’s suggestions to swap it at the right moment, we usually talk about years or mileage to respect. Otherwise, you could be the victim of a engine failure.
I listen a timing belt loud noise on my Renault Megane 2 after replacement
If you listen a loud whistling sound that does not disappear on the timing belt of your Renault Megane 2, it can be relating to a circular saw sound. It is more than credible that you will have to worry about it within moments. This can come up as a result of a poorly performed belt swap. In fact, some mechanician want to save time and do not respect the manufacturer’s stress specifications. In fact, to change a timing belt you must first fix the engine in a certain procedure, with the right gear. Then, when the belt is reassembled, you will have to manage its tension and comply with the manufacturer’s standard. To do this, we will use a tool called a tensiometer, but unfortunately some garages or mechanics do not apply themselves to one of these two tasks, which necessarily causes major issues for the vehicle owner. This leads to an over-tension of the timing belt which is even greater when hot and may eventually break. Take into account to take your vehicle to a professional to validate and resolve this problem. If, after checking out, this loud noise does not come from your timing belt, browse this article content on loud noises on Renault Megane 2 for more details about it. In the other hand, it could be a serpentine noise on Renault Megane 2 that you come across.
I listen to belt noises squealing or squeaking that increase Renault Megane 2
Finally, if you listen asound from your Renault Megane 2’s timing belt, it is imperative to take care of it and take your vehicle to your mechanic or risk engine failure. The reason for this noise is often an end-of-life belt that begins to degrade inside the engine unit and whose flaps begin to knock against the inside of the timing gearbox. Hurry to your mechanic. The replacement of a timing belt kit must always be done in advance as part of normal vehicle maintenance. If you wait until the failure takes place, it will be too late because the consequence of a timing belt failure is the failure of your engine. We will generally take this opportunity to change the accessory belt, the tensioning rollers that manage the tension of the belt and the water pump system. If you’re lucky and this noise doesn’t come from your timing belt, check out our article content on squeaking noise on Renault Megane 2.