It is never pleasant to notice a sound on your car you don’t where it comes from. So what if you establish a timing belt noise that lasts on your Mitsubishi Asx? It is highly plausible that this is a moderate trouble, but before being sure, it is better to perform some investigations. If this belt noise comes from your timing belt, our team has written this content to support you find and fix it. First, we will check out the timing belt noises on your Mitsubishi Asx and then we will look at the causes for these noises.
Noise of timing belt Mitsubishi Asx
The timing belt has a vital role to play. It acts as a conductor and synchronizes the engine crankshaft to the camshaft. It provides the correct transmission of movement to the valves and pistons, which must open at specific moments. It is the link between the top and bottom of the engine. It is sorely tested and wears out with time, it is up to you to respect the manufacturer’s recommendations to replace it at the right moment, we usually talk about years or mileage to respect. Otherwise, you could be the victim of a engine failure.
I perceive a timing belt loud noise on my Mitsubishi Asx after replacement
If you perceive a loud whistling sound that does not diminish on the timing belt of your Mitsubishi Asx, it can be connected to a circular saw sound. It is more than plausible that you will have to worry about it instantly. This can appear as a result of a poorly performed belt swap. Indeed, some mechanician want to save time and do not follow the manufacturer’s stress standards. Indeed, to change a timing belt you must first lock the engine in a certain process, with the right equipment. Then, when the belt is reassembled, you will have to manage its tension and comply with the manufacturer’s standard. To do this, we will use a tool called a tensiometer, but unfortunately some garages or mechanics do not apply themselves to one of these two tasks, which actually triggers major issues for the automobile owner. This leads to an over-tension of the timing belt which is even greater when hot and may eventually break. Keep in mind to take your automobile to a professional to validate and resolve this error. If, after checking out, this loud noise does not come from your timing belt, browse this content on loud noises on Mitsubishi Asx for more info about it. In the other hand, it could be a serpentine noise on Mitsubishi Asx that you come across.
I listen to belt noises squealing or squeaking that intensify Mitsubishi Asx
Finally, if you perceive asound from your Mitsubishi Asx’s timing belt, it is imperative to take care of it and take your automobile to your auto technician or risk engine failure. The explanation for this noise is often an end-of-life belt that starts to degrade inside the engine motor and whose flaps begin to knock against the inside of the timing gearbox. Hurry to your auto mechanic. The replacement of a timing belt kit must always be done in advance as part of normal automobile service. If you wait until the failure occurs, it will be too late because the result of a timing belt failure is the failure of your engine. We will generally take this opportunity to change the accessory belt, the tensioning rollers that manage the tension of the belt and the water pump system. If you’re lucky and this noise doesn’t come from your timing belt, have a look at our content on squeaking noise on Mitsubishi Asx.
