It is never relaxing to acknowledge a sound on your vehicle you don’t where it comes from. So what if you discern a timing belt noise that lasts on your Fiat Panda 2? It is highly plausible that this is a slight issue, but before being sure, it is better to accomplish some verifications. If this belt noise comes from your timing belt, our team has created this content to support you find and adjust it. First, we will take a look at the timing belt noises on your Fiat Panda 2 and then we will look at the causes for these noises.
Noise of timing belt Fiat Panda 2
The timing belt has a crucial role to play. It works as a conductor and synchronizes the engine crankshaft to the camshaft. It assures the correct transmission of movement to the valves and pistons, which must open at particular moments. It is the link between the top and bottom of the engine. It is sorely tested and wears out with time, it is up to you to respect the manufacturer’s recommendations to change it at the right time, we usually talk about years or mileage to respect. Otherwise, you could be the victim of a engine failure.
I listen a timing belt loud noise on my Fiat Panda 2 after replacement
If you listen a loud whistling sound that does not diminish on the timing belt of your Fiat Panda 2, it can be associated with a circular saw sound. It is more than possible that you will have to worry about it within moments. This can appear as a result of a poorly performed belt swap. In fact, some mechanician want to save time and do not follow the manufacturer’s stress measures. In fact, to change a timing belt you must first fix the engine in a certain procedure, with the right tools. Then, when the belt is reassembled, you will have to manage its tension and comply with the manufacturer’s standard. To do this, we will use a tool called a tensiometer, but unfortunately some garages or mechanics do not apply themselves to one of these two tasks, which actually triggers major concerns for the car owner. This leads to an over-tension of the timing belt which is even greater when hot and may eventually break. Think about to take your car to a professional to validate and resolve this error. If, after checking out, this loud noise does not come from your timing belt, go through this content on loud noises on Fiat Panda 2 for more details about it. In the other hand, it could be a serpentine noise on Fiat Panda 2 that you face.
I listen to belt noises squealing or squeaking that increase Fiat Panda 2
Finally, if you listen asound from your Fiat Panda 2’s timing belt, it is important to take care of it and take your vehicle to your motor mechanic or risk engine failure. The reason for this noise is often an end-of-life belt that begins to degrade inside the engine motor and whose flaps begin to knock against the inside of the timing gearbox. Hurry to your auto technician. The replacement of a timing belt kit must always be done in advance as part of normal car maintenance. If you wait until the failure happens, it will be too late because the consequence of a timing belt failure is the failure of your engine. We will generally take this opportunity to change the accessory belt, the tensioning rollers that manage the tension of the belt and the water pump system. If you’re lucky and this noise doesn’t come from your timing belt, check out our content on squeaking noise on Fiat Panda 2.
