It is never pleasant to perceive a sound on your car you don’t where it comes from. So what if you detect a timing belt noise that lasts on your Dodge Caliber? It is highly conceivable that this is a small problem, but before being sure, it is better to carry out some inspections. If this belt noise comes from your timing belt, our team has made this content to support you locate and adjust it. First, we will take a look at the timing belt noises on your Dodge Caliber and then we will look at the reasons for these noises.
Noise of timing belt Dodge Caliber
The timing belt has a major role to play. It operates as a conductor and synchronizes the engine crankshaft to the camshaft. It provides the correct transmission of movement to the valves and pistons, which must open at specific moments. It is the link between the top and bottom of the engine. It is sorely tested and wears out as time passes, it is up to you to respect the manufacturer’s recommendations to replace it at the right time, we usually talk about years or mileage to respect. Otherwise, you could be the victim of a engine failure.
I perceive a timing belt loud noise on my Dodge Caliber after replacement
If you perceive a loud whistling sound that does not disappear on the timing belt of your Dodge Caliber, it can be connected to a circular saw sound. It is more than credible that you will have to worry about it instantly. This can appear as a result of a poorly performed belt swap. Indeed, some mechanician want to save time and do not follow the manufacturer’s stress standards. Indeed, to change a timing belt you must first fix the engine in a certain method, with the right equipment. Then, when the belt is reassembled, you will have to manage its tension and comply with the manufacturer’s standard. To do this, we will use a tool called a tensiometer, but unfortunately some garages or mechanics do not apply themselves to one of these two tasks, which actually causes major concerns for the vehicle owner. This leads to an over-tension of the timing belt which is even greater when hot and may eventually break. Bear in mind to take your vehicle to a professional to validate and resolve this error. If, after verifying, this loud noise does not come from your timing belt, go through this content on loud noises on Dodge Caliber for more information about it. In the other hand, it could be a serpentine noise on Dodge Caliber that you come across.
I perceive belt noises squealing or squeaking that increase Dodge Caliber
Finally, if you perceive asound from your Dodge Caliber’s timing belt, it is imperative to take care of it and take your car to your technician or risk engine failure. The cause for this noise is often an end-of-life belt that begins to destroy inside the engine and whose flaps begin to knock against the inside of the timing gearbox. Hurry to your auto mechanic. The replacement of a timing belt kit must always be done in advance as part of normal vehicle service. If you wait until the failure arises, it will be too late because the result of a timing belt failure is the failure of your engine. We will generally take this opportunity to change the accessory belt, the tensioning rollers that manage the tension of the belt and the water pump system. If you’re lucky and this noise doesn’t come from your timing belt, check out our content on squeaking noise on Dodge Caliber.
