You acknowledge a starter motor noise on your Volkswagen Transporter 4 every time you start your vehicle. We can understand that this is not enjoyable and that you have questions. Experiencing such a noise is not always a good sign, but it may also be nothing major. To help you solve this problem, our team has decided to write this content page to assist you in this research. First, we will describe how the starter motor functions on your Volkswagen Transporter 4, and then what starter motor noises you can notice on your Volkswagen Transporter 4.
Functioning and various information
Function of a starter motor on Volkswagen Transporter 4
The starter motor is an electric motor whose single function is to start the engine of your automobile. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Volkswagen Transporter 4 is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Volkswagen Transporter 4
- Do not run your starter too long
- Do not use a starter motor on Volkswagen Transporter 4 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is drained, you always want to start your automobile, the energy it is capable of holding may not be enough to provide the power expected by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not treat the trigger of your failure to start repeatedly, your starter may be the future part you will have to change.
I acknowledge noises from the starter motor of my Volkswagen Transporter 4, what are the causes?
I experience a loud noise from the starter of my Volkswagen Transporter 4
If you perceive a starter motor noise on Volkswagen Transporter 4 and you have the feeling that it is close to a loud noise, it is plausible that it is the starter motor gears that are at the origin of it. In fact, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be ideal, in which case the gears will be worn down after some time and will not slip and will no longer properly engage the engine when starting. Verify the state of the drive pinion, if it is the element responsible of the starter motor noise on your Volkswagen Transporter 4 swap it.
If it is a noise in the front of your automobile but it seems to you after examining not to come from your starter, read this content page about front end noise on Volkswagen Transporter 4 which may provide you other leads to eliminate your noise problem.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Volkswagen Transporter 4
If you acknowledge a clicking noise at the starter motor of your Volkswagen Transporter 4, there are two possible failures relating to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You may have a problem with unplugged cable check your electrical installation. If after looking at this clicking noise on Volkswagen Transporter 4 doesn’t come from your starter motor, check this article for more informations.
